Starting problems...(yes I searched)
Well, here's the story. My dad, my friend, and I took a running 12A motor out of a FB and transplanted it into a much much nicer 85GS.
We put a Holley /w RB intake on it and RB Header. We cannot get it to start no matter what we do. I've replaced the fuel filter and the fuel pump, and I removed all the emissions. The carb is getting fuel so I know it isn't that. There's no spark from the Trailing plugs but the trailing coil is getting power. We've tried different plugs but its the same problem. My dad used to build rotaries and he said he's never had this happen to him before, but he has never worked on a newer 12A... it was always older 13B's and 12A's from RX-3's and R100s... Does anyone have an idea what's going on? I really need this car running cause I have no transportation to school or work :/. Thanks, Josh Ryan |
Originally Posted by KitsuneRacer
Well, here's the story. My dad, my friend, and I took a running 12A motor out of a FB and transplanted it into a much much nicer 85GS.
We put a Holley /w RB intake on it and RB Header. We cannot get it to start no matter what we do. I've replaced the fuel filter and the fuel pump, and I removed all the emissions. The carb is getting fuel so I know it isn't that. There's no spark from the Trailing plugs but the trailing coil is getting power. We've tried different plugs but its the same problem. My dad used to build rotaries and he said he's never had this happen to him before, but he has never worked on a newer 12A... it was always older 13B's and 12A's from RX-3's and R100s... Does anyone have an idea what's going on? I really need this car running cause I have no transportation to school or work :/. Thanks, Josh Ryan What plugs are you using too?? |
Originally Posted by KitsuneRacer
Well, here's the story. My dad, my friend, and I took a running 12A motor out of a FB and transplanted it into a much much nicer 85GS.
We put a Holley /w RB intake on it and RB Header. We cannot get it to start no matter what we do. I've replaced the fuel filter and the fuel pump, and I removed all the emissions. The carb is getting fuel so I know it isn't that. There's no spark from the Trailing plugs but the trailing coil is getting power. We've tried different plugs but its the same problem. Burnt trailing igniter, assuming its wired correctly. BTW, did you guys touched the distributor at all? If its not properly installed, it will crank but it wont start. Morethan likely, its flooded by now. BTW, Does it start if you pour gas in the carb? I like that...father & son team :bigthumb: |
Does not start if you pour gas down the carb....
We did not touch the dizzy. I figured the trailing ignitor was shot, so I am having him swap dizzys. |
I have the flu big time today, so no working on the rex.... we'll try switching the distributors tomorrow or something depending on if I feel better... I hope that's the problem cause I really need a car :(
|
All times are GMT -5. The time now is 07:15 AM. |
© 2024 MH Sub I, LLC dba Internet Brands