ROTARYSHACK 13B BLOW-THROUGH dyno results/video
people ask "how much power will it make" and i never had an answer for them, until now!
the car is a 83 mazda rx7 engine is a 91 j-spec turbo 2 motor transmission is stock stock turbo@10psi intake is a Weber 45mm DCOE non intercooled ignition is a locked distributor, 2 MSD 6 AL's , 2 blaster coils, MSD plug wires, NGK B10EV spark plugs lightened flywheel(steel) RPS turbo clutch the car runs on 91 pump gas see the video at www.rotaryshack.com/movies,, silver car see the dynosheet at www.rotaryshack.com/dynosheets silver car |
impressive.
|
the video is at www.Rotaryshack.com/movies
silver car this setup is very reliable and is the least inexpensive way to make your Mazda turbocharged with good results.if the car has good traction it should have no problems getting 12 second timeslips! I have alot of local guys with this setup that are pleased with the results |
ok, I am a little confused. Why does the dyno sheet say halltech - 25 lb boost?
|
Because you are looking at the wrong sheet.
Did you happen to have a wideband hooked up to it? I'd be interested in seeing the A/F ratios for that thing with no intercooler. |
Originally posted by rxseven ok, I am a little confused. Why does the dyno sheet say halltech - 25 lb boost? |
here is a better graph, im not too good with the computer , stuff, sorry
|
Originally posted by rxseven ok, I am a little confused. Why does the dyno sheet say halltech - 25 lb boost? |
Originally posted by Felix Wankel Because you are looking at the wrong sheet. Did you happen to have a wideband hooked up to it? I'd be interested in seeing the A/F ratios for that thing with no intercooler. the air fuel mixture was 11.5 all the way through the pull, look at the smooth hp graph... we made 3 pulls back to back , the last one made the most power! |
680, why no intercooler?
|
Originally posted by Directfreak 680, why no intercooler? intercoolers are not manditory, just an option..the car runs great without it, remember , its a budget turbo kit! plus since there is no intercooler, or intercooler piping there is NO TURBO LAG AT ALL!! on low boost turbo systems intercoolers are not as important as on a high boost application |
How much does the "budget turbo kit" cost?
|
Hi Robert. Thanks for posting this and I'm a happy camper! We already phoned to do a few more stuff (non-motor wise) since I have so little time to do anything because of my work. I'm glad that the wheels looks good on that car too. Once I get more internet savvy, I'll try to post more on this board. I'll be down in that area in the next few weeks as I see on my books.
Andrew Leung :p: |
cost and avalablity of the low cost turbo kit??
for GOD sakes MAN MORE Details !!! lol randy |
I would like to know what carb bonnet you are using
|
Turbo Plenum (bonnet)
we make our own and they are available to the public..
common sizes are always in stock http://www.rotaryshack.com/pages/plenum.html |
I'm glad that the wheels looks good on that car too. ~T.J. |
680, i see you gadda 12at for sale..is that the lowest price you can seel that beast @? im very interested
Stepdaddy |
"Im drooling over them ."
They do look nice don't they? Seems like a timeless design for that model car. Andrew Leung |
nice car 680, keep up the good work.
|
Originally posted by firstgen82 "Im drooling over them ." They do look nice don't they? Seems like a timeless design for that model car. Andrew Leung ~T.J. |
15x7 Panasports with 205 Khumos
I got them thru the parts trader |
That's pretty good numbers. Stock turbo, 10psi. I take it the engine porting and internals are all stock as well?
You could easily bump that number up with addition of an intercooler. I would only run without an intercooler with less than 8psi of boost. Plus adding one is that much more reliable. I'm sure you already know this (well, i KNOW you know this!) but I see you are talking just a "bolt on budget package" type of thing. Good work and good numbers, keep it up! ps - You know what would make that carb setup really sweet? See my username ;) |
Good job Robert. I knew you would make Andrew happy.;)
|
Hey, does that mean it's time for a...:grouphug:
|
All times are GMT -5. The time now is 04:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands