RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   Recaros in a 1st Gen. (https://www.rx7club.com/1st-generation-specific-1979-1985-18/recaros-1st-gen-110612/)

Directfreak 08-30-02 04:41 PM

Recaros in a 1st Gen.
 
My New “Old Skool” Recaro Seats. I need Rail Adapters or something. Any ideas?

https://www.rx7club.com/forum/attach...&postid=992529

https://www.rx7club.com/forum/attach...&postid=992534

https://www.rx7club.com/forum/attach...&postid=992542

Kinda Tight in the car, so I definately have to lower them.

https://www.rx7club.com/forum/attach...&postid=992551

I definitely need to get Seat Adapters made to bring it as low as possible,
But otherwise, a Good Fit.
https://www.rx7club.com/forum/attach...&postid=992555

I am going to have them re-done when I re-do the carpeting. I am going for black seat inserts with Grey Bolsters.

Anyway, Does anyone have a good idea on how to make these seats nice and low?

Manntis 08-30-02 04:43 PM

What model are those? The mesh headrests would actually compliment the cargo net I have behind my seats...

as to lowering, that's going to be a challenge unless you make shorter rails that avoid the lateral brace

MikeLMR 08-30-02 04:49 PM

They look like recaro's out of an 80's ford ... well they fitted them to the ones we got anyway :)

itzweapon 08-30-02 04:51 PM

nice!!
 
damnz br0.. th0se are sweet.. yew basturd.. i'm jealous.
i alwayz wanted a set of replacement seats for my car but could never afford the ones that i wanted. those are it. :[ :/ .
they match your car perfectly.
hey.. h0w much dew they weight? are they light compared to the factory se seat?..

Directfreak 08-30-02 04:51 PM


Originally posted by MikeLMR
They look like recaro's out of an 80's ford ... well they fitted them to the ones we got anyway :)
Alot of the recaros from the 80's early 90's had mesh headrests. These were a good buy for me from a guy who imports J-spec stuff (Non Mazda :( ) So I am pretty sure they're not Ford.

Even sitting on the floor, I could not believe the incredible lateral support over the stock seats. Night and Day.

itzweapon - It feels about the same weight.

mperformance 08-30-02 05:02 PM

Direct they look nice!

MikeLMR 08-30-02 05:03 PM

Those specific seats are probably not out of ford but they are exactly the same as the ones fitted as optional extras to Escorts , Capri's and Cortinas in the UK :) as well as Vauxhall astra's , Cavaliars and Carltons

Manntis 08-30-02 08:58 PM

you're a man of taste, DF

Mr. ImportGuy 08-30-02 09:21 PM

I wish I had money to spoil my car. :(

82transam 08-30-02 10:44 PM

Those seats are a pretty popular design, they could be found in the 82,83, and 84 recaro edition Trans Am's
If you can get them to fit in the 7 it will look really sweet.

MIKE-P-28 08-30-02 11:07 PM

Look like the old Capri seats to me...

Man you are spending a fortune on this. But seriously I think you need to get the motor and trans in there before worrying about bolting seats in.. You gonna need to run a few wires when you mount the battery in the back and I think that having the seats and carpet out, really makes it easier :D

Directfreak 08-30-02 11:23 PM


Originally posted by MIKE-P-28
Look like the old Capri seats to me...

Man you are spending a fortune on this. But seriously I think you need to get the motor and trans in there before worrying about bolting sets in.. You gonna need to run a few wires when you mount the battery in the back and I think that having the seats and carpet out, really makes it easier :D

The seat is just placed in. BTW, the seats were $200. I couldn't Not buy them for that price. The old engine is out. the new engine goes in tomorrow for a test fit. I already did Setzep's mod to the tranny. I already have 99% of the parts necessary, so the progress will go significantly faster soon. I am still married, so I can't work on it much more than one day a week. :(

The wires have already been run for the battery relocation, the amp, & the speakers. Tomorrow I will also do Hanman's 2nd Gen Fuseblock mod.

Dont worry, we'll run into each other eventually once they are both completely done and tuned. Then we'll have a friendly... 3...2...1...GO!!

MIKE-P-28 08-30-02 11:39 PM

Yeah OK, it will be funny me seeing _Se tail lights LOL

Felix Wankel 08-30-02 11:41 PM

You guys take some pictures of your battery relocation for me. I need some ideas.

Directfreak 08-30-02 11:53 PM


Originally posted by Felix Wankel
You guys take some pictures of your battery relocation for me. I need some ideas.
No prob. BTW, you can see some of Mike's relocation in his video's at the top of the thread.

MIKE-P-28 08-30-02 11:54 PM


Originally posted by Felix Wankel
You guys take some pictures of your battery relocation for me. I need some ideas.
Anthony in some of my vids theres a quick view of it... Doesnt show the fuse block and the circuit breaker but you get a general idea. I wont take pictures of it untill everyhting else is PERFECT. Remember I make my living wiring shit, and to me it looks like crap.. But anyways, theres a 120A manually resetable circuit breaker (runs 2 8 AWG to the stock fuse block on drivers strut tower, a 3 position MAXI fuse block. One 40A goes to the sub amp, 1 30A goes to the 4 ch A/D/S amp, and a 30A feeds the haltechs fuse block and misc stuff. Theres a 2 AWG feeding the starter, its wrapped in 3/4" heater hose to protect it, I had to take extra special care of that wire, since you cant put a fuse on it.

Directfreak 08-31-02 12:01 AM


Originally posted by MIKE-P-28
Theres a 2 AWG feeding the starter, its wrapped in 3/4" heater hose to protect it, I had to take extra special care of that wire, since you cant put a fuse on it.
Damn! Good idea. Makes perfect sense.

BTW Mike, now that you have it running, keep a fire extinguisher on board. No I am not kidding. I don't want you to ever need it, but if you do, you'll be thanking me.

I have seen the results of too many 3rd gens (and leaking injectors) where the owners had to stand by watching in horror - with nothing they could do about it.
:flamed:

gamble302 08-31-02 12:43 AM

i relocated my battery too
also gonna do that in the brown bullet too

drilled a hole through the firewall for the positive cable and put a rubber grommet to keep it from gettin cut wide open


cable was only long enough to reach the drivers side (doh) so i went ahead and mounted the optima red top behind the drivers seat. http://community.webshots.com/photo/...39880781wrklkl
i have the bins and crap out cause i dont like em and it made life easier, but im going to try and fit the battery under the bins in the brown car.

grounded the negative cable on a nice bolt inside after making sure it would get a good connection

under the hood i took all the existing positive crap and connected it all to a sweet aux jumping terminal: http://community.webshots.com/photo/...39880788wSCTPO

kerry helped me a lot on this one
sorry i would have more pictures but i did it well before i had my digital camera, and my other bro still hasnt given me my camera cable back so i cant just go out and take a few more real quick

any other questions?
gamble

gamble302 08-31-02 12:47 AM

oh and df please tell us what year/model they cae out of and what importer you got em from pleaaaase. as you can tell we all think they rock
im also kinda thinkin of the tan leather fd seats the fd guys seem to dislike to go with my brown leather interior

Felix Wankel 08-31-02 01:28 AM


Originally posted by Directfreak


Damn! Good idea. Makes perfect sense.

BTW Mike, now that you have it running, keep a fire extinguisher on board. No I am not kidding. I don't want you to ever need it, but if you do, you'll be thanking me.

I have seen the results of too many 3rd gens (and leaking injectors) where the owners had to stand by watching in horror - with nothing they could do about it.
:flamed:

Any rotary with a stock pulsation dampener is prone to a fire.

From what I can gather the Cosmo engine has the S5 style stamped fuel rails. The PD is integral to them (stupid design), which makes it hard to remove, although they are less prone to fail than the S4 ones. I like the S4 rails because you can tap them for a fitting ane be done with the fire hazard.

I have heard that MPV's use a remote PD that woud be nice to have, if you really want to keep running one.

Mike, thanks for the tip with the heater hose. That was the main wire I was worried about. I sold all my stero shit, so I'm not worried about amps and stuff. The only thing I'm worried about is getting the wire from the fuse block (I have an FC one on there) back to the storage bin. The way I ran my amp power wire (although it was 2 ga) before I wasn't happy with.

gamble302 08-31-02 01:43 AM

you mean any stock EFI rotary is prone to fire right?

Felix Wankel 08-31-02 01:44 AM

Yeah, cause the PD design is teh gay!

Directfreak 08-31-02 09:14 AM


Originally posted by gamble302
oh and df please tell us what year/model they cae out of and what importer you got em from pleaaaase. as you can tell we all think they rock
im also kinda thinkin of the tan leather fd seats the fd guys seem to dislike to go with my brown leather interior

I don't know what car they came out of. The seats part nymber is the 84 L-series which were made through 91 according to the recaro site.

My original goal was black FD seats, and I have sat in them in a 1st gen. They are aweome, and they are smaller than stock. I highly recommend Tan Leather ones for your brown interior. Good Choice! ;)

gamble302 08-31-02 10:11 AM


Originally posted by Directfreak


I don't know what car they came out of. The seats part nymber is the 84 L-series which were made through 91 according to the recaro site.

My original goal was black FD seats, and I have sat in them in a 1st gen. They are aweome, and they are smaller than stock. I highly recommend Tan Leather ones for your brown interior. Good Choice! ;)

thanks for the part on those recaros as i also have a nice gray cloth interior that they would look good in

yeah those fd seats are sweet and ive seen em gor for like 200 to 250 before just because the tans arent desireable

gamble

gamble302 08-31-02 10:18 AM

man if only i had 300 bucks to waste on seats check this out guys:
http://www.recaro-seats.com/recaro_se.htm

can you say drivers seat?


All times are GMT -5. The time now is 08:09 PM.


© 2024 MH Sub I, LLC dba Internet Brands