RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   Radio wiring? (https://www.rx7club.com/1st-generation-specific-1979-1985-18/radio-wiring-905210/)

79RX7IA 05-24-10 09:50 AM

Radio wiring?
 
I bought an aftermarket head unit for my 7 since I sort of blew the old one up... But the wiring is so different. The tape player is fried too so i just want to cut that out of the picture. The wires aren't color coded to match with the new ones, so i was wondering if anyone could help out? The model number is XD1222 http://www.dualav.com/support/manuals/xd1222.pdf

vj226966 05-24-10 04:56 PM

I would get a test light. Turn on your key and find out your hot wires. Turn key off and look for constant power. If all fails look up Crutchfield and get a harness from them. Its not as hard as you may think.

rxtasy3 05-24-10 06:24 PM

no aftermarket radio will have wires that match a car's factory wire colors. like vj said, get a test light or volt meter and find a switched +12v to power the unit with the ignition switch in acc and on position, and a constant +12v for clock and preset memory. if u don't have such a meter, now's the time to get one. volt meter will come in handy down the road. if ur not using an amp, it's good to run new speaker wire rather than try to find/use the pre-existing speaker wires. they're too small anyway.

OK13B 05-24-10 06:43 PM

I replaced mine a few years ago. i couldn't figure out the wiring. i ended up just rewiring everything. it took some time and i had to pull every pannel out of my car except the doors. it worked very well until it was stolen 5 times. no more radio for me

79RX7IA 05-24-10 07:48 PM

I got the power to work, now I dont know which wires are for which speakers. I tried touching them and got one to work, then I cut the wire to splice them together and then they didnt work???

vj226966 05-25-10 05:25 PM


Originally Posted by 79RX7IA (Post 10016058)
I got the power to work, now I dont know which wires are for which speakers. I tried touching them and got one to work, then I cut the wire to splice them together and then they didnt work???

You can either pull your speakers out and look at the color wires and trace them back or just run new wires.The factory wires are small so i would upgrade.Good luck!

SteveNC 08-05-10 10:09 PM

Is it safe to say that nobody has figured out the wiring on the factory DIN connectors leading from the stereo to the factory amps? I would love to see a wiring diagram for the factory amps so that I can make an adapter to convert the DIN to RCA for an aftermarket amp, or to see if I can utilize the factory 25x2 amps.
Why? Just because I want to see if I can do it.

soza127 08-05-10 11:22 PM

try this site maybe i'll help you on something www.jimrothe.com/mazda/rx7stereo/index.html .good luck

SteveNC 08-08-10 09:09 PM

That is exactly what I was looking for. Thanks much!


All times are GMT -5. The time now is 11:52 AM.


© 2024 MH Sub I, LLC dba Internet Brands