|
Damn clean. Makes me want to get a Rx-7 for a driver and not mod it as crazy as I have in the past.
|
Originally Posted by Directfreak
With the exception of a couple I am still seeing a bunch of RED X's.
I've checked with 3 of my PC's. All the same thing. Can someone at least upload them to the Forum? The blue latch was a dremel, epoxy and three blue leds. |
Hey did you notie any difference with the brace? Was it worth the $65 or should I make my own?
|
that is clean that looks like it is bran new. i like the moded rx7 light.
|
im really diggin your car man i like aloooot! the RX7 light is fuckin aweseme!
|
Originally Posted by Sgt Fox
yeah i have no idea. The server is mine and its running fine.
The blue latch was a dremel, epoxy and three blue leds. I still can't picture what you did exactly. Looks good though. |
where you driving this today? and anywhere near new west? cause i swear i seen it today
|
Originally Posted by Sgt Fox
Your browser must be high on drugs. Try again.
I do have the correct volume, I cut a premade box and then filled in the back of the cut with wood and dynamat. Sounds decent for the bass i wanted. All I was looking to do was add bottom end to the sound, and it does that nicely. With an aftermarket deck and better sub and amp, i think this would sound better, as now its not 'hear it from a block away bass' Then again, i wanted to keep it hidden and more original, and also, I only paid $200CAN for the whole setup.... Its that surgeons general warning that was in the lounge a few months ago, says something to the effect of rx-7 fumes are bad for your health, wear a gas mask or something or other is reccomended. I like it! |
Originally Posted by rxtory
where you driving this today? and anywhere near new west? cause i swear i seen it today
|
absolutly fabulous my man, excellent work, i love it all, but the light up rx-7 hatch thing is the greatest!
|
I have the same vented headlight cover. Did you have a difficult time removing the 4 screws that hold it on. I got two out ok, but the other two screws won't budge. Any suggestions?
|
all i can say is WOW! I really dig the interior, I can't wait until I get the dash and interior out of my 84 put in my 82, and it's the same color too. what are the rims you got and how much ?
|
Looks fabulous! The paint is so clean. IMHO the fog lights have to go, they look okay, but really stick out and ruin the clean lines of the car. Maybe change to round to match the headlights?
|
Man I love that Blue RX-7 Logo in the strike plate. It would be very cool if you detail how you did that. I would love to copy it.
|
Originally Posted by RX7Rox
I have the same vented headlight cover. Did you have a difficult time removing the 4 screws that hold it on. I got two out ok, but the other two screws won't budge. Any suggestions?
|
Originally Posted by Buffumguy1
Man I love that Blue RX-7 Logo in the strike plate. It would be very cool if you detail how you did that. I would love to copy it.
Next, get three LEDS, make a diffusion grating and then make contact poles so you can get power to it. If i get off my lazy ass i might take pictures later. |
Originally Posted by Sgt Fox
No, must be a twin, lol
but i was crossing the street and it was a light, the guy doesnt live here in new west cause i know where allt he 1st gens are located here but so many do pass threw, I have now seen 3 1st gens at this one light in New west |
Any pics of how the torque brace connects to the body?
|
|
Originally Posted by Directfreak
Can you post some pictures of it in the daytime, up close?
I still can't picture what you did exactly. Looks good though. http://foxed.ca/RX-7/RX-7 Small/DSCN0794.jpg http://foxed.ca/RX-7/RX-7 Small/DSCN0792.jpg The contacts: http://foxed.ca/RX-7/RX-7 Small/DSCN0795.jpg http://foxed.ca/RX-7/RX-7 Small/DSCN0796.jpg |
LOVEN' THOSE LIGHTS!!! The side stickers make them look like Marc's 1st gen.
|
Originally Posted by Sgt Fox
it looks a little lumpy in the picture for some reason, its smooth in real life, perhaps thw flash hitting the different layers of clear? Anyway:
http://foxed.ca/RX-7/RX-7 Small/DSCN0794.jpg http://foxed.ca/RX-7/RX-7 Small/DSCN0792.jpg The contacts: http://foxed.ca/RX-7/RX-7 Small/DSCN0795.jpg http://foxed.ca/RX-7/RX-7 Small/DSCN0796.jpg its hard... You need to basically dremel out the stock one, then put tape on the face and turn it over and pour in that epoxy shit that they use in craft stores for making thoese clear plastic coated wood stump tables. Then after that, sand the front down, paint the black part and cover it with clearcoat. t Next, get three LEDS, make a diffusion grating and then make contact poles so you can get power to it. If you notitce i used two pieces of spring steel, and two spade connectors I filed a little slot in the stud that goes though the window, basically so i could get the wires from one side other. The most important part is to make sure you get thin LEDS and I had to file mine even smaller. |
again: Hey did you notie any difference with the brace? Was it worth the $65 or should I make my own?
|
Originally Posted by Hyper4mance2k
again: Hey did you notie any difference with the brace? Was it worth the $65 or should I make my own?
|
|
| All times are GMT -5. The time now is 10:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands