Project Kramer Dyno - 370 RWHP!!
Well,
We had a really nice time on Saturday with the MRCCFL crew. We had a Dyno Event, a BBQ, and a tour oss the SpeedSource shop which is building competitive RX-8's for Daytona! I have a REALLY Good Video of my Car doing the Dyno runs, but I don't have a host that can support many users & high bandwidth. Anyway - I did Three pulls. 1) Stock Wastegate Spring at 9 PSI = 270 RWHP 2) Boost set to 12 PSI (What I normally use) = 315 RWHP It got a little lean at the top, so we decided to re-jet it for the higher boost runs for safety. Then: 3) Boost set to 17 PSI = 370 RWHP. All Done on a Holley Blow-Through system, on regular pump gas. Here is the Dyno sheet with all three runs: https://www.rx7club.com/attachment.p...postid=2588914 My tuner believes on C-16 (Race Gas) I could easily go to 23 PSI safely which should produce about 460 RWHP. I think I'll try that combination at the track for the hell of it :) So, who's going to host the VIDEO's? I have: |
Wow, can't wait to see everything after you get the race gas. That is amazing. Good luck with all of that.
|
DROOOOOOOOOOOOOOLS
Noice dude. i cant wait to slap mine on the dyno once i get it runniN! |
Wow! Great job of building a great running engine!
|
NICE!!
|
I can host the video, probably the decent one that is 15mb. Just email or pm me
omid@bcrx7.com Cheers, Omid |
DF that's awesome.
Must have a great turbo/compressor to do that much. Wonder if you still want to go Haltec after all that? Seems like you have something working real good. Scott |
Wow, those numbers are amazing! I bet it feels good to have all that work done. I'm shooting for 275 on a ported 12a blow through that I should be wrapping up shortly! I wish I could/knew someone that could host your videos, Im sure theyre pretty nice
|
Just imagine what power you'll make once you get around to putting the haltech on there again!
Either way, 370RWHP is pretty goddamn good, no wonder why u smoked that rx-8! |
Originally posted by hornbm Just imagine what power you'll make once you get around to putting the haltech on there again! Either way, 370RWHP is pretty goddamn good, no wonder why u smoked that rx-8! An RX-8 with an exhaust system Dyno'd yesterday too. 180ish to the wheels. |
or sell the haltech and buy some other stuff, seems like they holley is working just fine. I like the a/f's also.
-Marques |
|
nice, thanks but i can't see the video, all i'm getting is sound. it says i was unable to download a decompressor. whatever that means.
|
What are the details on your turbo setup?
Brian |
Originally posted by Rotofire nice, thanks but i can't see the video, all i'm getting is sound. it says i was unable to download a decompressor. whatever that means. |
Are you planning any races? I want to know how those drooling HP translate into speed. Post some slips or at least G-tech #'s.
can't wait. nice going. |
UNF UNF UNF.
That's awesome man....can wait to see what that thing can do. |
I wonder what 370 hp feels like in an FB..
thx for the vid |
Great vid Alex. That was a pretty good turn out at the BBQ.
I'll PM you the links of the wheels for your widebody |
Bitchin' dude.... It's awesome to see some real numbers from a turbo'd wankel... Great job!!!! :drool: :bowdown:
only one day I hope too see the same numbers from my car... :evilgrin: matt |
Truely amazing! I bet it feels great to see the actual numbers. I can't wait to see the vids.
Originally posted by Directfreak An RX-8 with an exhaust system Dyno'd yesterday too. 180ish to the wheels. |
Shit DF, I just wanted 350 RWHP on my project... Ya think I could pull that off with a blow through setup also? I was JUST thinking last night about going blowthrough for "simplicity" to start with (like ioTus), maybe using a DCO carb though, then later when I can afford it switching it out for an EFI throttle body. I would still run a stage 2 turbo and stuff, but do you think I could pull off 350 with a blow through stock port 13BT and modded turbo?
~T.J. EDIT: Heres what the site says about the turbo I plan on getting: Stage 2 Mega Hi Flow S4/5: .50 Comp cover and back plate fitted V trim front wheel T04 exhaust wheel Full recondition These units are the ultimate in bolt on horse power , they feature a T04 exhaust wheel/shaft , a T66 front cover , E-trim wheel and larger integral waste gate. Good for 240 + rwkw, they bolt on to the existing exhaust manifold and are good for low 11's to hi 10's in a well set up early Mazda. |
Originally posted by inittab Truely amazing! I bet it feels great to see the actual numbers. I can't wait to see the vids. Originally posted by inittab The problem with dynoing an RX-8 is that the computer senses front wheels aren't moving and puts the engine into "limp mode". I don't know if anyone has figured out how to bypass this little problem. |
Originally posted by Directfreak The Video is being Hosted by ABEOMID, see further up at his link. Originally posted by Directfreak They have, it still goes into limp mode, but not until you get the runs in. Thanks |
Originally posted by abeomid here's the video guys/gals: http://www.bcrx7.com/movies/Directfreak.avi Great video, nice server too, 260k/sec average. Mine's only making about 225-250rwhp now, can't wait until I put on the weber, T04B, and the intercooler. Oh yeah, the new dowel pinned and streetported 12a might help too :) Hopefully I'll be able to put down a bit more power then. |
All times are GMT -5. The time now is 05:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands