RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   parts ID question. (https://www.rx7club.com/1st-generation-specific-1979-1985-18/parts-id-question-822873/)

sa22c[est. 1979] 02-27-09 05:12 AM

parts ID question.
 
Hello there all while peeping under my hood today to find a cause for my persistent lack of power issue, I noticed some sort of cable coming from the carb. It goes into the rightside of the carb if your looking at the car straight on. I started her up, and sure enough, when you pull this cable the car revs, and the secondary side of the carb opens up. What is the cable and where does this cable attach to? Thanks in advance. The car is a 79 with 12a.

mazdaverx713b 02-27-09 07:56 AM

my guess would be hot start assist cable...

DivinDriver 02-27-09 09:57 AM

There are three mechanical cables that go to the right side (rear side) of the carb on an SA:

1) Choke cable goes to the top of the carb, connects to a linkage on the choke butterfly. Other end ges to choke knob on dash.
2) Accelerator pedal cable, goes to the bottom of the carb, to the large rounded cam with the cable guide built into it, on the primary butterfly shaft. Other end goes to gas pedal.
3) Hot start assist cable, goes to a linkage on the primary butterfly shaft. Other end goes to the hot-start assist motor, mounted on the driver's side fender. Meant to help prevent hot-start floods by electrically opening the throttle while cranking a hot engine.

Kentetsu 02-27-09 10:24 AM

What about cruise control? :)

mazdaverx713b 02-27-09 10:56 AM

i thought about that but he said he has a 79...

DivinDriver 02-27-09 11:09 AM

Possible could be an after-market cruise control added by a PO; didn't think of that.

sa22c[est. 1979] 02-27-09 11:35 AM

Ok so it's the hot start assist. If someone could post a picture of where exactly it goes that'd be awsome, as I'm not really sure, nor do I know HOW to reconnect it.

74RX4 02-27-09 02:38 PM

2 Attachment(s)
1984 version

DivinDriver 02-27-09 03:06 PM

1980 version:

It's the RED cable; follow it to HSA motor at bottom of pic on fender. Attaches with a small cotter pin.
http://img.photobucket.com/albums/v2...f/IMG_0054.jpg

Somewhat better (older) pic of it:
http://img.photobucket.com/albums/v2...f/PC090016.jpg

Carb end goes to this linkage (it hangs horizontally when it's hooked up):
http://img.photobucket.com/albums/v2...1552b6b9-1.jpg

Kentetsu 02-28-09 04:49 AM

It goes in the trash... :)

Nothing but dead weight and damn near useless. One of those things made just for "stupid americans" who
don't know how to start a car. Only reason to keep it on there would be if you are trying to maintain a
pristine all original type of car...

mazdaverx713b 02-28-09 05:39 PM

in theory the hot start assist is a nice concept....


All times are GMT -5. The time now is 12:19 PM.


© 2024 MH Sub I, LLC dba Internet Brands