New video of my car
 

http://www.ajc13b.com/Movies/ajc13b6.MPG

:D

hahahaah that sounds so sweet!

lol, you just cant start without doing a fat fishtail can you :D ('cutting loose', now this haha)

Ok?....
I think I saw that Vid before?

Doubt it, was recorded 24 hours ago :D

Maybe im physic?
Did you have one almost like this one? But your coming from an diffrent direction?

dam i like it

You always make the best videos AJC, with the smallest file size. You are a blessing to a dial up modem user. I salute you!

Had another one similar, but it hooked up through 2nd gear, that video fried 2nd :D

adrenal - I remember the slower people out there! :D :D

Hey man who you callin slow!? LOL I bet I'd give you a run for your money on the street! I love your car btw.

I can take it :D no problems here matey :D LOL

so does your hood always stay open just a little bit? Kinda like a cooling aid for the engine? :p:

Bring it on :D I was talking about our dial up friends by the way....

Not that it needs it, but yeah, always keep the bonnet open...

how do you get that thing to pass inspection? LOL

your car is my dream:)

Just brought a smile to my face :D

bet your neighbors love you :p:

is that with the new turbo? have you run it yet?

There are inspections over there?

Steve im considering next summer getting a 35/40, as far as all the turbos you have had , hows it compair?

As far as spool and lag etc :)

This sucks cause it wont load on my computer so I cant get to see one of my dream cars in action

Each year it only has to pass a roadworthy check, headlights works, stops okay etc etc. They don't care whats under the hood :D I have a full engineering certificate for my car anyway, so if the cops do pull me over, everything bar the exhaust is 100% legal :D

onepointone - Yep, new turbo and engine and yes its run in, cant you tell?? :D

mike - Like chalk and cheese mate! This turbo has so much more mid range, it doesn't even compare! In that video, its basically from idle and I stand on it and boom its frying the tyres :D

Did a quick test the other night, at 3000 and 25 inches of vacuum, stood on it and I have 10psi by 3500rpm :D I would recommend this turbo to ANYONE for a street turbo!

nice!

i meant have you ran it in the 1/4 yet

ight matey, sounds good what are those running now in the land down under?

Or could I just get a exhaust manifold meant for a FC to put this turbo in my car? I dont really feel like making a manifold and such...Would just rather buy one off the shelf, and I hear FD ones are outrageous in price when a FC one will work and they are cheaper... A 13B is a 13b right ?


Honestly to tell the truth, if I have to send this turbo I have back to get fixed, I will be fiending to go to the track, Ill probally drop $3k without thinking much about to just get on the road, its what I need to do anyways :D

Boinggggg!!!

no no no.... wwwwhhhiiiiiirrrrrrr ;) :p:

They are going for around $2000AUD at the moment. I might see if we can tune up an exhaust manifold for it as well if you want me to get one for you. Will be similar to mine and you can use the same wastegate (Turbosmart 45mm)

All up with turbo, mainfold and wastegate you might be looking at max $3500AUD + freight?

Yeah I was looking around doing some pricing, and I came up with this (all AUS $'s)

GT35/40 $2000
TurboSmart 45mm WG for $730

If I had your connection make me a manifold, and I got the turbo and wastegate, all I have to fab is the down pipe, and some IC piping and Im good to go...

Check and see what the manifold would cost to have made, keeping in mind I have nothing on the exhaust side of the motor, im betting mine loooks just like yours minus the steering box, so it should be loads simplier :)

Don't forget an oil feed!

Uh, anyway... Nice vid. Let's hope no cops look at your site and see this and all the others. Nah actually, doesn't matter, cause I'm sure they are all private roads. :D

Mike can make his own oil feed! :p

Yes, private roads all of them, I should have put that warning on all my videos :D

Yelp LOL

Hey I got this price... whats this look like steve?

Do you want a high mount GT35/40 Kit? If so I can do one with the items below:-



Gt35/40 turbo

Polished stainless steel manifold

Turbosmart 45mm Pro’gate

Stainless steel downpipe with wastegate plumbed back in and flex joint.

Braided stainless oil feed line

Oil drain tube off turbo

Water fittings for turbo

Gaskets for all the above



This kit requires you to move the air pump and possible cut a little of the fan shroud.

Price inc freight to the USA is $5500aud.



.

BUY BUY BUY!!!

If that includes freight, I would take it!

I think Im kinda scared of it Steve, thats an aweful lot of horsepower for an un built rotary, not to mention I got a shitload of other stuff to do to the car. maybe I should wait until I do the rear end mod, roll cage, new wheels and the rest of the body kit. Or I should roll stealth with >500 hp :D

thats one bad ass first gen rx7!!!! but you already knew that! car sounds great

Stealth is your friend :D

680 - :D

Im getting the turbo I have rebuilt, I think 82streetracer wants it. After that Ill see what I wanna do. I was happy with the turbo I had except for the smoking. But any rate this would be a bad ass first gen, but I aint telling you shit :)

Great video.......how come it sounds like the engine was stumbling a little bit in 1st gear? My car does that sometimes when it's cold and my secondaries start to slightly open.

That wa probally the haltech limiting the RPM's. Steve like when the tach is pointing at 6 o clock :D

I think that is what you call feathering the throttle:D You can do that when you have that kind of power!!!

Hey, I think he was on the wrong side of the road......so was the car coming at him!! JK

Yup, it was the rev limiter :D

Set at 8500, with the GT don't need to rev it any higher!

Anyone still have this video?

I reformatted and lost it.

video doesnt work...hmmmmmm?

Probably because this thread is half a year old. ;)

But yeah I'd love to see the video as well.

i went to the webpage and it has some awesome videos there i was watching!!!! definatly worth a look!

IT DOESNT WORK FOR ME :(
"Internet explorer was not able to open this Internet site. The requested site is either unavaliable or cannot be found. Please try again later" Whats that all about??

check his website

I NEEED THIS VIDEO.. i lost it too

Will check when I get home, it should still be there.

If not I will rehost - Check this thread in about an hour or 2

Video is back up

http://www.ajc13b.com/Movies/ajc13b6.MPG

:D

AJC13B
Nice vidio!
How much does the car weigh?
chuck