Need Help With My Rx-7 Tires and Suspension!!!
Hi: My name is Alex and I leve in Guatemala City.
I have a First Gen, 1980 Rx-7 and I`m going to buy new tires for it. I`m looking to buy as this way the tires: Front: 215/50-13 Bridgestone Rear: 235/50-13 Bridgestone I`m also going to buy the Racing Beat springs for my car. The question is: Are the Rear tires going to look to wide for the car??? :( :( Please, it`s a simple question, advise me because i`d never seen an Rx-7 like this... Best Regards, Alex :bigthumb: |
I've seen 235's on the rear of an RX7 before. On 8" wide rims though and with perfect offset.
What rims are you using? |
What wheels are on the car? 235's wont fit on the stock rims.
|
Originally Posted by S2-13BT
I've seen 235's on the rear of an RX7 before. On 8" wide rims though and with perfect offset.
What rims are you using? http://memimage.cardomain.net/member.../315421_14.jpg |
Originally Posted by Rx7carl
What wheels are on the car? 235's wont fit on the stock rims.
I`ve seen an Rx-7 right now with the tires that I want but it does not have springs. :rolleyes: |
Here is a link with the tires that I want: http://www.cardomain.com/memberpage/460945
And here are some pics :bigthumb: : http://memimage.cardomain.net/member...945_6_full.jpg http://memimage.cardomain.net/member...945_2_full.jpg |
HAYASHIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII. Nice. I used to own one. cant remember exactly the model #. I think its 502's??
|
I have a set of 225 50 13 hoosiers for my car and they stick out on the sides like a Mo Fo! but they are 0 offset
|
Well Im not sure you can squeeze that size tire on the rim. I run 215/50/13 Sumitomo tires on my stock rims and they are good. :)
|
I have BFGoodrich radial T/A's on my car, 205/60R13 on stock rims. The rears rub on the fenders when the suspension compresses. But my suspension probably compresses too far. The bump stops are gone. But anyway, I don't see the need to go any wider. Just a waste of money unless you are making a significant amount of power more than stock.
|
Originally Posted by 85rotarypower
I have BFGoodrich radial T/A's on my car, 205/60R13 on stock rims. The rears rub on the fenders when the suspension compresses. But my suspension probably compresses too far. The bump stops are gone. But anyway, I don't see the need to go any wider. Just a waste of money unless you are making a significant amount of power more than stock.
I will have to search for 225/50-13 on bridgestone or Hossiers, but I know here is to difficult to find them. :confused: |
Originally Posted by Rx7carl
Well Im not sure you can squeeze that size tire on the rim. I run 215/50/13 Sumitomo tires on my stock rims and they are good. :)
|
Dunno, but I dont think 225's will fit the stock rims well if at all. The 215's barely fit.
|
Originally Posted by Killer Bee Fan
Well, my car has a 45mm Weber, 12A Pierce Manifold, Racing Beat Headers, Bridge Port Engine, MSD Ignition Coils; That`s why I thought I could use this tires.
I will have to search for 225/50-13 on bridgestone or Hossiers, but I know here is to difficult to find them. :confused: 45 on a BP? how does it run with a small carb. |
Originally Posted by wackyracer
45 on a BP? how does it run with a small carb.
It runs quite good but I know if I had a 48 IDA it will run better but I don`t have the money right now and here in Guatemala is too expensive to find the parts to do it. |
All times are GMT -5. The time now is 12:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands