RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   My 79 Sa22C Project (https://www.rx7club.com/1st-generation-specific-1979-1985-18/my-79-sa22c-project-1147762/)

Shredduuhh 10-06-20 03:33 PM

My 79 Sa22C Project
 
Hey guys,

Not entirely new to this, but here we go anyway.

Picked up this 79 a little over a year ago, classic ran when parked special.
Previous owner bought it from the original owner and never put in his name.

16 years later, late fees, oxidation and rust, i told this bitch to wake up hahaha.
https://cimg5.ibsrv.net/gimg/www.rx7...8cf2a6deba.jpg

Car needed EVERYTHING.
Got the gas tank RE-done, Radiator RE-cored
Installed new brake lines front and rear, I also Upgraded to S2 Front brake Calipers and brackets.
New Hub Assemblies and bearings
All new rear suspension bushings (superpro)
Big axle GSL rear end with discs
Dual Electric Fan setup on a thermostat
Fresh water pump and all cooling components
Some sick ass star sharks
Brake Booster, Brake Master

https://cimg4.ibsrv.net/gimg/www.rx7...f0814bcc8a.jpg
https://cimg3.ibsrv.net/gimg/www.rx7...48dd1cc46f.jpg
https://cimg2.ibsrv.net/gimg/www.rx7...c3d6d32a5b.jpg
https://cimg1.ibsrv.net/gimg/www.rx7...54587feb3b.jpg
https://cimg0.ibsrv.net/gimg/www.rx7...519191fd59.jpg

I dont know what my future plans are.

For now, with a baby on the way i gotta work with what i have already purchased, and go from there

All the car needs are Coilovers, Inner tie rod ends, strut bar to chassis mount bushings, pitman arm, and ball joints,

Its pretty much done to my liking. But i walked out yesterday morning to find a small puddle of gear oil and im pretty sure i destroyed an axle seal the other day after a small burnout at work haha.

for now, ill just stare at it. ahah

Frogman 10-06-20 05:41 PM

We need to get a SA car meet set up in So cal just to meet whos out there. Nice car btw! fix that rust though, its gonna spread if you don't

Shredduuhh 10-06-20 11:30 PM


Originally Posted by Frogman (Post 12437922)
We need to get a SA car meet set up in So cal just to meet whos out there. Nice car btw! fix that rust though, its gonna spread if you don't

thanks dude! I have all kinds of pics of it on my Instagram

@braplifesa22c

I'm sure I could try and help make something happen man. You on insta?


Mivroum 10-07-20 03:07 AM

Nice car, I love the wheels.
It deserves to be loved and gets the few parts you mention and a nice paint.

Shredduuhh 10-07-20 07:55 AM


Originally Posted by Mivroum (Post 12437973)
Nice car, I love the wheels.
It deserves to be loved and gets the few parts you mention and a nice paint.

Much appreciated man. She'll get some soon enough. I gotta start detailing more haha. Wife agreed thats how I can fund my build haha. But puffco just dropped their new puffcp peak pro haha 😄 😆 so I'm like ugh. What to buy.

7aull 10-08-20 11:39 AM

Great Resurrection! Enjoy. Bit shocked at rust around rear hatch (??) and antenna mount? Hope it does not portend worse issues buried beneath! Would urge you to yank up that rear hatch seal (rust prone) area and clean that up. Make sure you check the DRAIN hole/tubes (2 or 3 - depending on chassis SN - in the hatch, 2 on the sunroof) to make sure they are clear.

Stu A
80GS
AZ

Frogman 10-08-20 06:59 PM


Originally Posted by 7aull (Post 12438191)
Great Resurrection! Enjoy. Bit shocked at rust around rear hatch (??) and antenna mount? Hope it does not portend worse issues buried beneath! Would urge you to yank up that rear hatch seal (rust prone) area and clean that up. Make sure you check the DRAIN hole/tubes (2 or 3 - depending on chassis SN - in the hatch, 2 on the sunroof) to make sure they are clear.

Stu A
80GS
AZ

I caught the rust early on mine on the very righthand bottom down there I can see it destroying the bottom above the bumper ..


All times are GMT -5. The time now is 02:34 PM.


© 2024 MH Sub I, LLC dba Internet Brands