Mikuni Jets
 

I haven't opened my Mikuni up yet so I'm asking you guys what type of jets are in these carbs?

Any pics available?

https://www.rx7club.com/1st-generation-specific-1979-1985-18/another-mikuni-thread-526723/

i can get you some pics of actual jets later tonight.

As far as I know they are Mikuni specific. There are several different types too.

I have a handful of Mikuni jets sitting here, not sure of the sizes but I can find out.

i need some 62.5 pilot jets and 240 main air jets.

a couple jet pics.

There's more under the carb top. LOL.

Good stuff guys, keep it coming.

You asked



https://www.rx7club.com/attachment.p...d=167225&stc=1

https://www.rx7club.com/attachment.p...d=167226&stc=1

https://www.rx7club.com/attachment.p...d=167227&stc=1

https://www.rx7club.com/attachment.p...d=167228&stc=1

https://www.rx7club.com/attachment.p...d=167229&stc=1

Mods, this should be archived.......

If I could copy and load the manual, I would, but the file size is too big for each page. I may try and copy into Adobe and see how big it is. If I can't load it up here, I might be able to e-mail copies out.

agreed.

Don't get in a hurry. There is more that can be included.

Has anyone PM'ed Camocarl to see what size jets he has and what he wants for them?

yes, i did. havent heard from im yet though.

why are the velocity stacks always cut up on these carbs? i dont like it.

The jets are at the shop, I may be over there tomorrow.

To fit inside of most of the air cleaners. The carb in the pic has them on backwards. If the air cleaners were wider, there is no need to trim the stacks, but it would require relocating the alternator.