RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   M.O.P. Questions (https://www.rx7club.com/1st-generation-specific-1979-1985-18/m-o-p-questions-150730/)

yayo420 01-20-03 02:21 PM

M.O.P. Questions
 
Can I disconnect my MOP lines to the carb if i run pre mix? or can I disconnect it allltogether?.....Also I know this has been asked a thousand times but what is the ratio of oil/gas do I put in the tank.....ALSO...When I put on my new water pump the bolt that goes into the waterpump that holds the tensioner bracket to the alternator wont line up....It wont go in for shit....What should I do?....Please help me out guys!!-----Kevin

error402 01-20-03 02:26 PM

I use 1 oz. of two cycle oil to 1 gallon of gas.

-Error

bliffle 01-20-03 03:51 PM

8 oz. of MMO per tank.

B

85RX7GS 01-20-03 03:56 PM

I use the same ratio as error402 with the metering pump.

yayo420 01-20-03 04:22 PM

Can I disconnect the MOP if I run pre mix?

85RX7GS 01-20-03 04:27 PM

Yes

yayo420 01-20-03 06:13 PM

Now what should I do about the tensioner bracket?

yayo420 01-21-03 12:26 AM

I guess Im just fucked!:(

error402 01-21-03 08:55 AM


Originally posted by yayo420
I guess Im just fucked!:(
Why? Did you break something?

I run without the OMP and run premix. (I've been doing it for about a year now.)
I just opened up the OMP and took out the internals; then placed the original plate back on and finally connected a hose to the two nipples.

-Error

yayo420 01-21-03 03:04 PM

Well this all started as a water pump replacement...When I was putting my alternator back on i found that the bolt that goes into the water pump that holds the tensioner bracket for the alternator wont go back in...its like the the water pump face and the "body" dont line up by like 1/16 of an inch.....Just enough to piss me off...im thinking of just carfully drilling into it to knock off that 1/16th.....The reason I asked about the MOP is cause when I was putting the alternator back on I some how snapped one of the lines...I was told I COULD NOT run w/out it or I would blow my motor....I guess it dosent matter for now cause I damn sure cant run w/ out an alternator.....Any Suggestions??????

yayo420 01-21-03 05:52 PM

I fixed my prob w/ the bracket bolt.....I just beat the shit out of it till it fit.......AOK;)

error402 01-21-03 08:40 PM


Originally posted by yayo420
I fixed my prob w/ the bracket bolt.....I just beat the shit out of it till it fit.......AOK;)
:eek: :rofl: :bigthumb:

-Error

RotorMotorDriver 01-21-03 08:54 PM


I was told I COULD NOT run w/out it or I would blow my motor....I guess it dosent matter for now cause I damn sure cant run w/ out an alternator.....Any Suggestions??????
It is correct you should never run your engine without some sort of oil in there to lube stuff up. You can loose the OMP and just run premix in the gas. So if you want, just disable your OMP and run premix in the tank every fill up and youll be fine :). Plus youll know that theres ALWAYS oil in there and youre not relying on some old thing that may not be pumping right anymore cause of a blown seal or something.

~T.J.

yayo420 01-21-03 09:14 PM

Ove taken care of both my probs but I think Im gonna Shit-can the mop anyway cause theres nothing safer than running premix.....one question though.....what grade should I use orshould I run something like MMO?....Thanks for the help.....


All times are GMT -5. The time now is 02:49 PM.


© 2024 MH Sub I, LLC dba Internet Brands