RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   GSLSE Sun roof and Moon questions (https://www.rx7club.com/1st-generation-specific-1979-1985-18/gslse-sun-roof-moon-questions-57371/)

Mags 02-26-02 11:57 AM

GSLSE Sun Roof and Moon Roof questions
 
Hello all.

Is it common when a moonroof and/or sunroof, from an 85 GSLSE rattles when traveling on rough grade?

Has anyone experienced this? If so, how does one fix it. I'm finding it quite annoying.

Thanks!

M.

MarkPerez 02-26-02 12:22 PM

i agree..mine rattles a bit..i have the glass moonroof.
with the metal roof it's fine,,i replaced the screw crank
and that didn't do it,,but on the roof,the red latch part
where it attaches to the car,is the part that rattles.
take some tape and wrap the pins a bit,and that will work....your right,,it bugs !!!

rxtasy 02-26-02 03:04 PM

i've never had that prob with my metal roof, i just got a glass roof for the summer it better not rattle! i tried it for fit but haven't drove around with it yet.

mine rattles behind the rearview mirror/light assembly. i keep meaning to take it apart and see what the hell is going on, but i always forget until i'm on my way somewhere and it starts up. i must look pretty sick screaming at my rearview as i drive down the highway :rant:

edit:spelling

Mags 02-26-02 03:11 PM

heh
 
Nah, I yell at my 7 all the time. It makes it go faster.

:eek:

yayarx7 02-26-02 04:42 PM

I had wore out hinges/thingy's that are on the front of my 80 roof. they used to be coated with a rubbery substance, but are now wrapped with electrical tape to prevent rattles:D

Pele 02-26-02 09:05 PM

They sell plasti-goo-dip at tool stores for handles on pliers and stuff. This might be a good application for it.

4carbRX 02-26-02 10:33 PM

Here's an easy fix for that irritating, vibrating, blurry rearview mirror - cut a 1 3/4" length of 1/4" rubber fuel line. Slide one end over the nipple on the mirror arm and wedge the other end against the windshield. You may have to make a couple of attmepts at cutting the right length but you'll get the idea. It stops that annoying rattle and clears up the view in the mirror. It's my kind of fix - easy and cheap.

yayarx7 02-27-02 02:29 AM


Originally posted by Pele
They sell plasti-goo-dip at tool stores for handles on pliers and stuff. This might be a good application for it.
I thought about that myself. I think I will try it out and let yall know.

iyaseven 02-27-02 06:21 AM

that fix for the rearview mirror came as original equipment, but most have been lost in the two decade plus struggle to stay road worthy. my se had one in the ash-tray until i realized what it was for. also, my glass sun roof has two 1&1/2" carpart squares glued to the front corners. previous owner must have done it. no rattle tho'

rxtasy 02-27-02 07:27 AM

i still have the original plastic thingy that goes between the rearview and the windshield, i think the rattle in mine is coming from the wire that connects the light. there isn't much behind there that could cause a rattle.

i'm gonna go put my glass roof on and drive around today! thats all i need is another rattle!

Mags 02-27-02 10:07 AM

Ya know, I tried to add electrical tape to the hinges of my glass roof, but once the tape was wrapped around the hinges they would not fit into the connector slots. I then tried thinning out the tape a bit but even with on single layer the hinges would not fit into the connectors. Odd. I'll try what Pele has suggested next, the "plasti-goo-dip" application material. Thanks Folks!

M.

MarkPerez 02-27-02 12:24 PM

On my car the plastic coating for the two moonroof
tabs is still good,i've tryied some tape on the two pins
of the screw crank, and even with one wrap of tape
it's too much,maybe some of that dip would work there.
A lot of 2ed gens i've seen at the junkyard have the
rearview mirror rubber,when i bought my car it alreaddy
has that rubber piece..and i'm a GS.isn't that a SE thing
or did they all come with it.or was it an option for all models ?...that dip was a good idea pele...good one !!

project7s 05-08-14 11:29 AM

Ok I'm bringing this old as heck thread up because I'm having the same problem, I've tried 3 glass ones and 1 plexiglass one and all rattle! The problem is not the back of the roof where the rotary knob is, its the from of it where the two hooks slide into the body. The hooks are like too thin, has and one else had this problem? If so how did you fix it? The plastic sleeve that's screwed in to the body is not broke, cracked, or warped.

CyByrd 05-08-14 12:31 PM

Yup. A little noise from the sun roof when I have it cracked and a small sound form the rear view mirror. Well and the wind noise coming from my drivers side window but hey. I luv that dang car--bet dd can come with sum n. dd?

Sent from my iPad using RX7Club. how bout that!


All times are GMT -5. The time now is 05:35 AM.


© 2024 MH Sub I, LLC dba Internet Brands