GSLSE engine into a corrolla ae86 help
 

So i finished installing the engine and trans on the car and now im on to the wiring im using the stock ecu and harness need to know what cables to connect to ground and power to get it running I know there are some threads can anybody post some links to point me in the right direction

You can get all the wiring diagrams you'll need for a GSL-SE here:
http://foxed.ca/foxed/index.php?page=rx7manual

But depending on if you're swapping EVERYTHING including emissions and such over or you are stripping it down to just the simplified setup, you will likely have to do some searching through the first gen forum on what to do.

yea im going to get rid of all emissions thanks for the site ill get started with it and post here if i runn into any problems

there are two grounds that are bolted to the emissions rack. they are for the fuel injection and they bolt to the rack through the same hole.

You might also want to check the "Other Rotary" section, there are's a lot of engine swap experience there.

Show us some pics!

+1 show us some pix!!! that would be an awesome swap. i always wanted to get an old school toyota and swap in a rotary.

this guy did something similar: http://www.ohiorotaries.com/smf/index.php?topic=4042.0

ha thanks this is my car by the way my bro there made the post

friend of mine gave me his ae86 for free with a clean tittle so i started working on it

has some rust and missing some parts

plans are

13b bridgeported
vaccums and emissions deleted
racing beat header
full 3 inch exhaust (not cats :D)
reupholster the interior
repolish the wheels and find some drift rims
coilovers
tucked engine bay
aluminum radiator
and much more

started sanding down the old paint fixing the rust
https://i1095.photobucket.com/albums..._4744422_n.jpg
put some wheels on
https://i1095.photobucket.com/albums..._6067991_n.jpg
wripped out the 4age
https://i1095.photobucket.com/albums..._1050620_n.jpg
then degreased the engine bay
https://i1095.photobucket.com/albums..._6616230_n.jpg
and put in a 13b
https://i1095.photobucket.com/albums..._3555442_n.jpg
finished the mounts

https://i1095.photobucket.com/albums...a/IMG_0684.jpg

racing beat header exhaust almost done

https://i1095.photobucket.com/albums...a/IMG_0683.jpg

shitty engine bay pics(iphone quality)

https://i1095.photobucket.com/albums...a/IMG_0682.jpg

https://i1095.photobucket.com/albums...a/IMG_0681.jpg

took the fd seats making seat rails for it now so the interior is going to be black and tan and the outside red

https://i1095.photobucket.com/albums...a/IMG_0678.jpg

maybe daily these since the welds have slicks on the rear

https://i1095.photobucket.com/albums...siphone424.jpg

Nice.




.

it reminds me of the good old days....good luck