RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   gsl-se Power Steering (https://www.rx7club.com/1st-generation-specific-1979-1985-18/gsl-se-power-steering-873770/)

stobrien 11-15-09 09:47 PM

gsl-se Power Steering
 
I am going to add power steering to my 85 GLS-SE. I have the pump and Steering box. Is there anything else that I need?

Whisper 11-15-09 10:22 PM

Well, assuming you have all the piping and the P/S fluid cooling line, then you should be all set, unless the steering shaft you have right now isn't compatible with the P/S box. I think P/S shaft is the two-piece and uses a connector bushing, don't know about the regular steering shaft on GSL-SE.

84stock 11-15-09 10:31 PM

The shaft and box are one unit. My suggestion is to set all the adjustments on the box up as per the fsm before installation.

Rx-7Doctor 11-16-09 02:07 AM

Did your car come with A/c?

If not then you will need to get the proper mounting bracket for the P/S.

You also need the adjuster assembly.

Belt, pressure and return hoses.

Whisper 11-16-09 02:24 AM


Originally Posted by 84stock (Post 9625206)
The shaft and box are one unit.

Wasn't on my car. The box has its own mini shaft that connects with the main shaft through a bushing.


All times are GMT -5. The time now is 06:03 PM.


© 2024 MH Sub I, LLC dba Internet Brands