fmic pictures???
 

im curious to see how other people have mounted them. i have a starion intercooler i mounted with some fabricated supports. its kinda, just there. functionally, i think it will work well, but it looks out of place. either way, i dotn care, im always fuction of looks, but like i said, i wanted to see what yall have done.

heres mine...

http://www.angelfire.com/va3/rx23/images/frontmount.jpg

Only looks like this until the Mode One bumper is on.

http://www.nopistons.com/forums/uplo...1063261215.jpg

heres a bad pic of mine with the starion ichttp://us.f1.yahoofs.com/groups/g_23...h6xf_APgg.ioBD

Here is mine.

https://www.rx7club.com/forum/attach...postid=2204841

Uh...I dont have one yet, but when I do, you can be sure Ill post a picture, lol. Im gonna use an NPR :).

~T.J.

FYI, There are three NPR Ones.

1) Small
2) Large - Like Mike's
3) Large and Black. - Like Mine.

Although I peeled the paint of mine.

heres a 87 vovlo intercooler.

I got it for 17 BUCKS it is perfect.

Fits perfectly, doesnt even need to be boltedd down, it is just a interference fit between the belly pan and the front hood piece.

I had to trim off this piece of metal on the cooler, but then I just loosened the belly pan bolts alittle and it pops into place, then just tighten the pan agian.

https://www.rx7club.com/forum/attach...postid=1914526

I'm not running an IC with my setup, not yet at least. It's running good so far without it :)

Im using the large :).

~T.J.

I've also got a Starion IC. It fit pretty well with the nosepiece on.

got a picture? or is it mounted like mine?

ahh turbo fb's give me wood :D

wow, stop posting turbo stuff, your gonna put me in dept... i have my heart set on turboing my car now haha

heres one of mine from the front http://us.f1.yahoofs.com/groups/g_23..._G7f_A_jhTpWUH

why is there a DEAD Plucked baby Chicken on the floor under your car?

Looks like a Rice Racing/custom IC Setzep, is it?

~T.J.

Ultralights- cause I ran that fucker over! oh wait.... it was either that or a paper towel, one of the two ;)

RotorMotorDriver- Ding Ding Ding! :)

Heres' mine, right behind the grill.


http://www.imagestation.com/picture/...d/fae707dc.jpg

Woah, what are you running under the hood there web?

~T.J.

thats more of what i wanted. is there anyway i can see how you mounted the intercooler and the radiator. the way mine is mounted right now, im sure something is going to rip it off or damage it hardcore, i just dont see any other way to mount it

onepointone show us how yours is mounted. I used the stock mounting tabs on the starion ic bolted to L brackets I made. I also used the stock t2 rubber washers/mounts to help cushion any shock/shake. I am a little worried about the starion tabs because they where bent by the previous owner and I had to bend them back. I will try to post a better pic latter.

I don't know how much you can see from here.

The radiator is stock mounted. I had u brackets (middle of pic) welded to the bottom of the ic and hose clamped it to the front bar. On the top, there is a bracket that is bolted to the bumper. It's slanted the same angle as the grill

http://www.imagestation.com/picture/...5/fae4e7d8.jpg

Cartech manifold, T04 - .81ar, Vortech FMU, inline fuel pump, FMIC, 3" exh.

Stock engine and EFI!

http://www.imagestation.com/picture/...9/fae4e7d3.jpg