RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   farqin'freezing rain (https://www.rx7club.com/1st-generation-specific-1979-1985-18/farqinfreezing-rain-264789/)

rotarydankus again 01-26-04 12:46 PM

farqin'freezing rain
 
after leaving mellow yellow parked for a few days i am forced to drive it back to work, its 20 deg out and my drivers door is froze locked and i broke both door handles on pass door trying to get it open . crawled throu hatch to get in it , its been running for .5 hr now , hopefully itll open when its warmed up, how do you open pass door if the latch frags? ive had tto do rude shit to a ford before. any ideas?

oni-dori 01-26-04 03:13 PM

daaaaamn.... that is cold!!!

GavinJuice 01-26-04 03:34 PM

thaw it out and open it from the inside, looks like your going to have to find a new door handle a replace it.

jorx81@aol.com 01-26-04 05:18 PM

a few pitchers of hot water have always worked for me.

rotarydankus again 01-26-04 06:30 PM

well the drivers side is ok. but the pass side wont open the latch is fragged, and the outside handle is mulched. thankfully i didnt fuber the sheet metal around the outside handle

MosesX605 01-26-04 06:45 PM

That sucks man. If it makes you feel any better, it's minus 28 degrees Celsius here.

1stgen4life 01-26-04 06:48 PM

Wow, and I thought that utah was cold! Hopefully you get the handle fixed. Good luck.

alien_rx7 01-26-04 10:53 PM


Originally posted by rotarydankus again
well the drivers side is ok. but the pass side wont open the latch is fragged, and the outside handle is mulched. thankfully i didnt fuber the sheet metal around the outside handle
Sorry to hear about the door, we had the freezing rain here too. Probably about 1/8-1/4" on everything. Just left the 7 parked and didn't even bother trying to open it.

If you take the door panel off inside, you can get to the actual latching mechanism that holds the door closed and just monkey with the couple of connecting rods that go to it and it will open.

Just to think I went to the junkyard Saturday while the weather was a balmy 40F and finally got a replacement bumper skin for my bumper. Can't even install it right now because of ice and temps in the teens.

KehoeAutomotive 01-26-04 11:25 PM

You should be able to take the inner door handle off and grab the latch Rod with a pair of pliers and pull once the ice has thawed out.


Throw some hot coco on the ice or pee on it. That'll melt that ice.


All times are GMT -5. The time now is 07:49 AM.


© 2024 MH Sub I, LLC dba Internet Brands