EGT ? Pics? Thread Pattern? etc etc etc etc etc LOL
 

Anyone have or know where I can see a picture of a EGT probe for an autometer guage?

I went ahead and put an extra bung in my downpipe for reason I dont wanna disclose (jeremy knows why :( ) Also anyone know if its the same thread pattern as a regular o2 sensor?

The bung on Bryan's car looked smaller to me...


http://store.summitracing.com/global...e/atm-5244.jpg

Vendor: Auto Meter Products, Inc.
Product Line: Auto Meter Pyrometer Accessories
Material: Stainless Steel
Length: 6 ft.
Diameter: 1/4 in.

Precise exhaust temperature readings.

1/4 in. x 6 ft., braided stainless steel, street series, thermocouple probe kit


Monitor your exhaust gas temperature with this Competition series probe kit. This complete probe kit includes a 1/4 in. diameter stainless racing probe with 6 ft. wire, plus 1/4 in. compression to 1/8 in. NPT connector and weld on fitting included.

Sold as a kit.

Ok heres what happened, I screwed up and welded the bung for the A/f's o2 sensor on the wrong side, when you use a o2 with it, its hits the firewall. I got about 1 1/2 inches or so before Im at the fire wall... I would just weld this hole up, but if i can use it for something then so be it... Now its a bung for a standard GM o2 sensor, im thinking of using an old o2 sensor, cutting the end off leaving the nut and tapping the center out for a egt probe, but im unsure its gonna miss the firewall...

face it your FUCKED!!:D

I still have the Big Fucking Hammer option (BFH), but thats a little crude for my standards :)

Well it's setzep's downpipe now...

Two O2 bungs compared to the EGT probe bung.

https://www.rx7club.com/forum/attach...&postid=921456

Mike, you screwed over your whole car, and set your startup date back by like 2 weeks....

Now what do you have to say to your fellow forum members about this devastating news?

What about the Rotary Gods? They will for sure look down on you...

:p: :D

Jeff

Rotary gods piss me off, Ill put an LS1 in there :) LOL

hahaha! *lol*