Do I need a new center iron?
 

I was cleaning my recently pulled motor and noticed my center iron on the inside had some loose metal pieces and a part of the the coolant passage on the outside had broken off. I’m guessing I should start trying to find a new center iron shouldn’t I?

For context the motor had a leak from a freeze plug and from the water jet seal and had been sitting with a little bit of coolant in the motor for two plus years.
https://cimg3.ibsrv.net/gimg/www.rx7...615171733.jpeg
https://cimg0.ibsrv.net/gimg/www.rx7...4b8956ee2.jpeg
https://cimg1.ibsrv.net/gimg/www.rx7...aaa9f106f.jpeg
https://cimg2.ibsrv.net/gimg/www.rx7...cfb40af53.jpeg

Cast iron vs water. We know who wins :(
With everything it takes to rebuild (time, un-re-useable soft parts) I personally would not risk using this.
Q is what else is failing that hasn't fallen off yet?
yeesh...

Stu A
80GS
AZ

that has had water freeze in it.