carb trouble (again)
 

OK i have a 1982 rx7 and yet again my carb is being homo! it used to overflow and pour straight into the carb took it aprt and cleaned everything now it doesnt overflow BUT! the jets are leaking usually after it stops turning over it alos stiil wont start i replaced the ditributor cap and rotor button but it still wont start i dont know if its the timing or if i screwed up the order in the wiring or wut but im gonna check on that today.but the carb i dunno if ne know wut could cause this plz lemme know

well i checked the wiring and its all good it finally started today but i had to keep my foot on the gas..i guess cause its getting to much gas but i dunno i dont jack crap about this car so i figure this is the best way to find out...ask

So you need to learn about the car first :-) Read the faqs and start searching the 1st gen forum to start with.

You haven't given us enough info to be a lot of help. What kind of carb or is it stock ? Any mods ? Are you getting spark ? Are the plugs getting fouled ? Whats the history ? What did you do lately to the car?

We aren't mind readers and we can't see your car from here, so you have to describe every last detail in order for us to help.

If you ask a general question you get a general answer, if you ask a specific question you get a more specific answer.

ok here goes it is a stock carb i recently took the top part off nd cleaned EVERYTHING cause im too poor to buy a rebuild kit when i did it stopped it from over flowing and started pooring out of the jets it never stops i do get spark i know that (shocked the hell out of me) but it will fill up the carb on the four barrel until it overflows to the top (BAD!) and when it finally does run gas literally sprays out the exhaust....if u want more info tell me i see wut i can do

Go here and download the carb manual. http://www.wankel.net/~krwright/cars/rx7/manuals.html

If you can't figure out what your problem is, at least you be able to give a better description of it.

yeah that website helps alot thx! but if ne one else has an idea about it lemme know ill probably just rebuild it but if itll save me the money ill do it..so just lemme know sumthin ..thx guys

Rebuild. AND DO NOT FUCK WITH THE FLOAT SETTING.

Somethin tells me the float needles are dry-rotted.

...damn sumthin tells me im just gonna have to rebuild this shit,

i bought some seafoam HOPE IT WORKS!!!

I agree with Lovintha7, your float needle/seats are shot.
Scott