RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   blower motor only works on medium and high (https://www.rx7club.com/1st-generation-specific-1979-1985-18/blower-motor-only-works-medium-high-178195/)

82transam 04-19-03 08:08 PM

blower motor only works on medium and high
 
Ok, on my 83 GS the blower motor won't work on low, nothing happens when you turn the knob to that position. I wouldnt really be concerned with it at this point seeing as the car still doesn't run right, but my parts car is going in a week or so and i wanna be able to fix all teh little things on the GS before the Le gets hauled off. Any thoughts?

Rotary Revolution 04-19-03 09:05 PM

I kinda had the same problem, but on low it barely worked and clicked really loud. I dropped the blower motor out out, and clean it up. Now it works like a charm!

AdrenalifeRX7 04-19-03 10:34 PM

Common problem. If it isn't the blower motor itself then it's the dial switch. Try changing that first.

ZigZag 04-19-03 10:44 PM

Same problem on my 82 GSL. Only runs on high. I regulate the temp with the sliders and don't worry about it.

bliffle 04-20-03 12:10 AM

My 83 doesn't work at all. Found a burned out fuse mount and repaced that, then it whined a little before it stopped again. Guess I gotta pull the fan and do something: what's the easiest way?

B

SoRRoW 04-20-03 05:05 AM

Sounds likea blown blower motor resistor,(where the plug/plugs into)

82transam 05-03-03 10:18 PM

whoa, i forgot all about this thread. stupid email notification didn't work i guess. Anyway, thanks for the responses guys, I'll have to mess around with it tomorrow.

jutny 05-03-03 11:09 PM

mine only works on high, and its noisy... i may replace it with the one from the 79... hmm


All times are GMT -5. The time now is 02:34 PM.


© 2024 MH Sub I, LLC dba Internet Brands