RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   Belt problem with my 83...I'm going through a new belt every month! (https://www.rx7club.com/1st-generation-specific-1979-1985-18/belt-problem-my-83-im-going-through-new-belt-every-month-439776/)

428CJ 07-02-05 04:21 PM

Belt problem with my 83...I'm going through a new belt every month!
 
My car keeps eating my fan and alternator belt ... i duno why either... I can't see anything that it is rubbing on... and I don't know why it is so loud... it makes loud screaching noises when i start it. What's the problem?

KCGSLSE 07-02-05 04:38 PM

My alternator belt used to squeek on startup, it was loose. I loosened the two alt bolts and repositioned the alt so there was enough tension on the belt and its been fine since.

428CJ 07-02-05 04:46 PM


Originally Posted by KCGSLSE
My alternator belt used to squeek on startup, it was loose. I loosened the two alt bolts and repositioned the alt so there was enough tension on the belt and its been fine since.

wow.. :rlaugh:

rotor vs. piston 07-02-05 05:13 PM

^^so is that your issue? also check to make sure you put the belt on correctly, I know it sounds stupid but my dad told me the my bro flipped a belt inside out and then put it on his truck and could never figure out why the belt would squel, alt wouldn't charge, and the engine keep getting warmer than it should. Also if the car is new to you check the alinement of the pulleys as they might be off for some reason.

jrs10 07-02-05 06:06 PM

Check to see that there isn't extra drag on the water pump pulley or the alternator pulley... also is the spacer still there for the alternator mount? If your alt is positioned incorrectly (a bit fore or aft) then you may have a lot more drag on the belt causing premature failure.

428CJ 07-02-05 06:37 PM


Originally Posted by jrs10
Check to see that there isn't extra drag on the water pump pulley or the alternator pulley... also is the spacer still there for the alternator mount? If your alt is positioned incorrectly (a bit fore or aft) then you may have a lot more drag on the belt causing premature failure.


Ok I may see if thats the problem...

And no the problem wasn't a loose belt.. I was laughing that someone would suggest that... That I would be to lazy to tighten it, even though I"ve already changed belts twice...


What is this:: and how do I loosen it...?


http://img130.imageshack.us/my.php?i...ties0260zj.jpg

Rotary20B 07-03-05 02:20 AM


Originally Posted by 428CJ
Ok I may see if thats the problem...

And no the problem wasn't a loose belt.. I was laughing that someone would suggest that... That I would be to lazy to tighten it, even though I"ve already changed belts twice...


What is this:: and how do I loosen it...?


http://img130.imageshack.us/my.php?i...ties0260zj.jpg

You laugh at a suggestion to tighten the belt, I was thinking same thing when you said it squeals, yet you don't know what an air con compressor is..

Jeff20B 07-03-05 03:15 AM

Clutch fan may be stuffed.


All times are GMT -5. The time now is 10:14 PM.


© 2024 MH Sub I, LLC dba Internet Brands