Battery Hold-Down......... Pics
 

Hey guys!
Someone asked about Battery Hold-downs. Here is a pic of one i
bought from Autozone. It is a Lynx #06057-LBHK.
Hope it helps someone!

Myc1972 (Buddy)


PS: Anyone got any recommendations for an engine cleaner spray that wont
hurt our rotaries? It's going to be that time of year to start detailing.

Corrosion prevention
 

.... I did not even had to cut the hold-down rods, for mine.


On another matter:

Even with the red and green post felts, corrosion did built up around the post
to the point were the battery clamp bolts rusted so bad that i can not turn them.
And the head on one of the bolts is totaly worn away by the previous owner. It
will be a PITA to remove the positive battery clamp when the time comes.

One tip on preventing corrosion build up that works good is using "Petroleum
Jelly" to coat the battery posts & Clamps.

juego de sujetador para bateria!

spanish, jejeje

Good idea! :bigthumb:

Same one that I have! I spray the posts with WD40, often; wiping away excess.

Vipernicus ! Carl !!! This is impotent shit that everybody MUST read. Please make a sticky of this thread.

Thanks.

Engine cleaning?
Simple Green and a toothbrush (with SOS pads for the real narly bits). Worked like a charm on my 80...
Stu Aull
80 GS Alaska

yeah that battery hold down kit kicks ass. I modified one to fit my smaller Odyssey battery...

7aull i was born in Fairbanks in 84, my father had a 79 RX-7, i have 3 FB's now

I read on the back of the bottle that it pits aluminum, or is that castrol super clean?

I use di-electric grease instead of vaseline. It's actually meant for it:bigthumb: