RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   82 auto swap to 5 speed - trans stuck in reverse (https://www.rx7club.com/1st-generation-specific-1979-1985-18/82-auto-swap-5-speed-trans-stuck-reverse-1007358/)

MIKE-P-28 08-05-12 02:48 PM

82 auto swap to 5 speed - trans stuck in reverse
 
Ok got Robbie's engine and trans swapped but damn trans stuck in reverse. It acts like I can shift to 1st and 2nd but anything to the right won't shift. This is the ONLY 5 speed I could find within 3 hour drive!!! I got it from the local junkyard. It's been pulled in climate control without oil for over 15 years!! What you guys think? Get it hot with some new oil in it and maybe it'll free up? Advice? I really don't want to pull this damn thing out!

Qingdao 08-05-12 03:45 PM

Change it with half ATF and half gear oil....


Its worth a shot. :dunno: Other than that you're gonna have to pull the transmission.

MIKE-P-28 08-05-12 04:59 PM

I can also tell you the pedals from a 79 are different from an 82! Dammit!

MIKE-P-28 08-15-12 07:58 AM

Took the trans apart. Three shift rods, the middle rod will NOT move. I think thats the selector between the 2 shafts? Anyway, took it back and got my money back.

xXGslseSleeperXx 08-15-12 06:24 PM

the detent on the gear shift fork rod(idler gear) was notched too small and the spring is too weak(its a common problem) to keep the check ball in it. next time if it ever happends you can just remove the reverse switch and pry it backwards with a screwdriver and replace the spring with one with more tension.

MIKE-P-28 08-16-12 09:20 PM


Originally Posted by xXGslseSleeperXx (Post 11189951)
the detent on the gear shift fork rod(idler gear) was notched too small and the spring is too weak(its a common problem) to keep the check ball in it. next time if it ever happends you can just remove the reverse switch and pry it backwards with a screwdriver and replace the spring with one with more tension.

Interesting, I pulled that bolt, spring and all that stuff apart. Still wouldn't move, even with a tap from a hammer :) LOL

xXGslseSleeperXx 08-17-12 01:45 AM

if you mean tapping the bottom rod than yes it is hard with no leverage thru the switch hole but the middle rod is for 3rd and 4th. the 3-4 shift rod(middle) for some reason will not move if the 5-r rod is still stuck in reverse gear. but if you got the 5-r rod back in its nuetral position and the middle rod still wont budge than yeah its a good thing you took it back! thats cool that they gave you your money back:icon_tup:, over here there is no such thing from junk yards:(

MIKE-P-28 08-17-12 06:31 AM

if you look at it from the top looking down. The rod on the left and far right would move up and down no problem. The middle one was STUCK! I got an 83 engine and trans with 76k on it in a package deal for $200. The transmission is now in the car, works perfect! Didn't need the motor but hey you never know... Never saw a PS pump for an 83. So it might have some sellable stuff on it LOL

xXGslseSleeperXx 08-17-12 05:19 PM

Damn!!!!! thats one hell of a deal! i found a 84 gs at an ecology and asked the lady what she'd charge me before i pull it and engine alone was 350.00 and i faked that it wouldn't "turn" over!

dakota's rx7 08-17-12 05:55 PM

there is lots of first gen trannys where im at. pm i can give you some info

MIKE-P-28 08-18-12 12:38 AM

Thanks Dakota I got it sorted out now. I got an 83, I want to change to stick but not soon. I haven't got enough nerve to start taking apart a 7 with 44,000 miles on the clock yet.

dakota's rx7 08-18-12 08:46 AM

anytime. and i dont blame you there. i blew up my first are a 79 volare with a slant six the car still sits today with only 34,000 on it after the seven im putting my 340 in her.

dakota's rx7 08-18-12 09:48 AM

dont know if this would work but just saw it and thought of you.
1980 RX7 5 Speed Transmission

MIKE-P-28 08-18-12 10:29 AM


Originally Posted by dakota's rx7 (Post 11192582)
dont know if this would work but just saw it and thought of you.
1980 RX7 5 Speed Transmission

Its different, I got a 79 trans here with 80k on it... Nice good shifting, couldn't use it. The shifter is too far forward in a SA

dakota's rx7 08-18-12 12:08 PM

ok just saw that and didnt know if you could use it or not


All times are GMT -5. The time now is 12:48 AM.


© 2024 MH Sub I, LLC dba Internet Brands