1984 rx7 12a engine swap
 

i am looking to swap my engine out of the rx7 i just bought it has 181,000km so tha seals are set to go anytime now,anyone know a good place to buy a new engine(rebuilt or new).

any good proformance sites you know of?

Welcome to the forum.

What give you the idea the engine is about to blow at anytime? Some have gone over 300,000 miles without a rebuild. I comes down tohow it's driven and how well it's maintained.

Check my sig line for links to the FSMs, carb manual and other rotary related reading.


Download YOUR copy of the FSM Then read it.

http://www.wankel.net/~krwright/cars/rx7/manuals.html

I won't tell you again.

Attention: newbies. READ THE FAQs, OR

Upgrade your beehive oil cooler here. https://www.rx7club.com/1st-gen-archive-71/cooling-oil-how-install-fc-oil-cooler-1st-gen-write-up-pics-478521/


My toy. https://www.rx7club.com/build-threads-293/unvieling-12a-bp-widebody-462184/

Also, check the Canadian regional forum for nearby members. They can advise you on nearby builders and help you get started down the right path.

There goes the neighborhood! :-)

Some reading for you intoxicated.

https://www.rx7club.com/1st-gen-archive-71/good-bad-ugly-performance-parts-suppliers-480076/

https://www.rx7club.com/1st-generation-specific-1979-1985-18/1st-gen-rx-7-faq-page-237777/

https://www.rx7club.com/1st-generation-specific-1979-1985-18/rules-1st-gen-section-89820/

https://www.rx7club.com/1st-generation-specific-1979-1985-18/how-use-forum-tutorial-series-720499/