12a to 13b street port conversion
Hey all
I am planning on converting my 12a to a 13b street port sometime in the up coming months. A buddy of mine is taking his 13b out and swapping to a T2 so I decided to buy his old setup at a price I couldn't refuse. Expect many photos over the coming months of the progress of my second rx7. Josh |
Going EFI or hogged out nikki or some other carbs?
|
Going with 48 Weber down draft. It's a whole setup from a buddy that is switching to a T2 in his car.
|
Here is a photo from last weekend of my turd. Makes a good 2 screen background photo since it is 3840x1080https://cimg0.ibsrv.net/gimg/www.rx7...b237448259.jpg
|
just a small update
Here is the Street port engine that is going to end up in my Roturd. Comes with 48 down draft webber with racing beat intake along with RB header and rebuilt transmission. Also have MSD ignition that will go on after the engine is installed and running good. Also going to be switching to a ebay radiator since mine has a broken mount.
https://cimg3.ibsrv.net/gimg/www.rx7...3c158e8b7e.jpg |
This weekend I am planning on replacing all the door seals, all the radiator hoses and the radiator itself. I am replacing the rear brakes finally and also installing the Banzai racing dual pulley setup along with there alternator tensioner. Finally I will have working windshield wipers again hopefully as long as the switch works on the column. I will be taking photos of everything and will post them up on here Sunday or Monday.
Side note: I was wonder what size the stock wheel was so I had a good reference to pick out one from NRG. Thanks Josh |
Weekend update
9 Attachment(s)
So I got everything installed that I had ordered. Sadly I got the rear brakes off and the pin in the caliper is froze up so I am ordering new calipers to go on this weekend. Ebay special radiator works well and fit well. Here is what I got done:
Banzai racing dual pulley set A/C working Wiper motor Radiator with new hoses Things left to do: Door seals Rear Brakes Alignment Engine Swap Here are some photos for people that want to see. |
Here is a video of my last autoX run this past weekend. I ended up somewhere in the middle of the pack with tires that aren't anything special.
|
I ordered a clutch today for the motor going into the car. From here the car is almost ready for the new motor. I plan on doing the swap in May.
Josh |
Today the spending continues. I bought a universal Racing Beat 2.5" muffler and the K&N Weber IDA kit for my turd. RB is expensive but this is the end of the purchases that I have to make for the car. Whoooooo!!!!!!!
Next time I will see the car will be at the next AX. Then it will be on a trailer back to where I live for the swap. Josh |
Got some a little done this weekend
3 Attachment(s)
Just dropping in to show the work I got done on the headers this weekend. They had some surface rust that wasn't going to come off so I scrubbed them down and painted them black with 2000 degree rattle paint. They turned out nice and should look great in the bay next to the motor.
https://cimg1.ibsrv.net/gimg/www.rx7...0923616595.jpg Headers before https://cimg9.ibsrv.net/gimg/www.rx7...c75dd7074d.jpg Headers after |
Quick video from last weekend at AutoX. Came 3rd overall in my class but on my last fun run ended up running faster than anyone in my class.
|
Went and did some more autocross a couple of weekends ago. Fun time especially since it rained while we were on lunch break and changed the course feel up dramatically.
Here are both of my good runs. Run after the rain. |
1 Attachment(s)
So the amount of parts I have laying around is starting to get out of hand. I am getting excited for the swap and hopefully will be coming up soon. Here is a preview of some of the parts I have.
|
First night auto cross of the season. Came in third behind an S2K by a few tenths of a second.
|
I'm still here. Going to start the build up soon.
Here is my most recent video: |
nice
|
Received my Simpson helmet and Corbeau seat over the holidays. looking forward to installing those soon.
|
Let us know how the T3 suspension feels. Ive been wanting to get a set too.
|
Will do. Here is the current status of what I am working on. Its been slow since I am having to do the swap in a buddy's basement since I live in an apartment. Plan to start pulling the motor this coming weekend.
|
It has officially started. Here is the video of my buddy and I prepping the car to pull the motor.
Enjoy! https://youtu.be/g7nSYSiqOgA |
Here is the video of my buddy and I removing the 12A from the car.
Happy Brapping. |
Hey guys in the next week I should have the video of me and my buddy installing the new to me engine. But while you wait here are some photos for you to drool over!!!https://cimg6.ibsrv.net/gimg/www.rx7...e839377207.jpg
https://cimg8.ibsrv.net/gimg/www.rx7...717445d1bc.jpg https://cimg0.ibsrv.net/gimg/www.rx7...1450594105.jpg https://cimg1.ibsrv.net/gimg/www.rx7...3379c413ec.jpg https://cimg2.ibsrv.net/gimg/www.rx7...ab0540a1a1.jpg https://cimg3.ibsrv.net/gimg/www.rx7...65dfe9916f.jpg |
|
Link to all current build photos. More will be added once things are completed.
Rototurd Evolution - Follow my video updates here: https://www.youtube.com/channel/UC-eijOsfFfd10hBmLqAaWwg - Album on Imgur |
All times are GMT -5. The time now is 01:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands