post 1st gen with 17 ,18 wheels bodykits custom paints etc
1 Attachment(s)
sweet 1st gen Attachment 721557
|
1 Attachment(s)
|
1 Attachment(s)
|
1 Attachment(s)
|
yea, i think i'll stick with 16"s...
|
custom body kit , custom hood, custom light scoop and wing. but hoping to get some 17inch rims next year. but for now rolling on 13inch.
http://i46.tinypic.com/14wsvsx.jpg http://i49.tinypic.com/jhbvjm.jpg |
how hard is it to open the boot with that wing on?
|
Originally Posted by thunkrd
(Post 9730165)
how hard is it to open the boot with that wing on?
|
man, the front end of that car looks heavvvvy. Maybe bulky is a better word. Mad props for doing it yourself though!
|
Originally Posted by el canito rotary
(Post 9729643)
Originally Posted by openshot
(Post 9730153)
custom body kit , custom hood, custom light scoop and wing. but hoping to get some 17inch rims next year. but for now rolling on 13inch.
http://i46.tinypic.com/14wsvsx.jpg http://i49.tinypic.com/jhbvjm.jpg Then again, after seeing your pictures on FB, this car fits you well... |
at least change the wheels to some nice mesh and get a suspension...
|
Originally Posted by thunkrd
(Post 9732996)
at least change the wheels to some nice mesh and get a suspension...
|
It's his car. I don't understand either, and I think it's horrendous, but whatever floats his boat.
Originally Posted by thunkrd
(Post 9729921)
yea, i think i'll stick with 16"s...
|
love love love first gen drag cars!!!!!!
|
Originally Posted by whitey85mtu
(Post 9732981)
That is hot (even tho I don't much care for drag racing). Fast, stock body, huge tires tucked. SICK.
:puke: I do have to ask, do you get made fun of for your car at your High School? Then again, after seeing your pictures on FB, this car fits you well... like i said i wanna get some rims and i need to paint my grill silver i would lower it a inch but then i cant get it in or out of the garage because i only have a 1 inch or i will bottom it out. |
Play nice :)
|
3 Attachment(s)
Back on topic, here is my FB widebody 17" CCW classics. Personally I think 17" is the biggest I would go on a first gen. Seems to be a good size for looks, performance and decently priced tires.
Attachment 721561 Attachment 721562 Attachment 721563 |
1 Attachment(s)
Originally Posted by openshot
(Post 9733229)
the only people who said crap was the people who are chevy fans and dont even have a car or G1 but i have not had the car on the road driving it around town yet but this summer and i am remaking the bodykit but i showed the kids that had cars and driving them liked it and my town is a GM town. but i say FUCK THE HATERS
like i said i wanna get some rims and i need to paint my grill silver i would lower it a inch but then i cant get it in or out of the garage because i only have a 1 inch or i will bottom it out. http://i265.photobucket.com/albums/i...u-speak-it.jpg
Originally Posted by Dan_s_young
(Post 9733507)
Back on topic, here is my FB widebody 17" CCW classics. Personally I think 17" is the biggest I would go on a first gen. Seems to be a good size for looks, performance and decently priced tires.
https://i3.photobucket.com/albums/y8...g/IMG_2911.jpg https://i3.photobucket.com/albums/y8...g/IMG_3587.jpg https://i3.photobucket.com/albums/y8...ung/rim1-1.jpg THIS is the way that a widebody FB should be built. This, along with Trochoid's widebody and the red car below, are damn impressive cars, and the only way IMHO that a kitted first gen should look. Attachment 721564
Originally Posted by PercentSevenC
(Post 9733168)
It's his car. I don't understand either, and I think it's horrendous, but whatever floats his boat.
17s look funny in pictures, but in person they're not bad as long as you pick the right wheel. And I agree that most 17's look funny in pictures. However, WAS:12A's 17's are hot in pictures.
Originally Posted by Sgt Fox
(Post 9733378)
Play nice :)
|
http://memimage.cardomain.com/ride_i...0014_large.jpg
http://memimage.cardomain.com/ride_i...0015_large.jpg http://memimage.cardomain.com/ride_i...0019_large.jpg 2nd gen sub-frame parts are sand blasted, 4-pot brakes and bigger wheels will get there eventually 17" seems to be the consensus around here for looks/perf. I dunno... I've seen some 17s that look too small and some that look too big... Have to see what I can fit under my non-widebody fenders.... |
Originally Posted by rotaryboy23
(Post 9734241)
2nd gen sub-frame parts are sand blasted, 4-pot brakes and bigger wheels will get there eventually 17" seems to be the consensus around here for looks/perf. I dunno... I've seen some 17s that look too small and some that look too big... Have to see what I can fit under my non-widebody fenders.... |
Originally Posted by el canito rotary
(Post 9729642)
|
8 Attachment(s)
^Look like 18's
Couple of mine, it's now sitting another 20mm lower since these pics were taken Attachment 721565 Attachment 721566 And some more... some racers but meh, I still love em Attachment 721567 Attachment 721568 Attachment 721569 Attachment 721570 Attachment 721571 Attachment 721572 |
Originally Posted by Jimbo II
(Post 9739430)
^Look like 18's
Couple of mine, it's now sitting another 20mm lower since these pics were taken http://i276.photobucket.com/albums/k...r/DSC00666.jpg http://i276.photobucket.com/albums/k...r/DSC00665.jpg And some more... some racers but meh, I still love em http://i276.photobucket.com/albums/k...r/IMG_6760.jpg http://i276.photobucket.com/albums/k...r/DSCN0025.jpg http://i276.photobucket.com/albums/k...26005969-L.jpg http://i276.photobucket.com/albums/k...1000010zr0.jpg http://i276.photobucket.com/albums/k...r/13bppsev.jpg http://i276.photobucket.com/albums/k...vonsimmons.jpg You guys down under have crazy SA's. I'm jealous. |
1 Attachment(s)
SA front ends just look better than FB front ends :(
Anyone know who makes this airdamn or whether it will fit an FB? Attachment 721573 |
Originally Posted by Starfox07
(Post 9740143)
SA front ends just look better than FB front ends :(
Anyone know who makes this airdamn or whether it will fit an FB? http://i276.photobucket.com/albums/k...r/DSC00666.jpg The airdam is $446 AUD ($288 USD), and shipping is well in excess of $700 AUD ($451 USD). This doesn’t include insurance. Goods will be manufactured after a 50% deposit is taken. Manufacturing takes 2 weeks, and shipping takes 4-12 days. Some other sort of related info, too... https://www.rx7club.com/1st-generation-specific-1979-1985-18/510-spook-airdam-832194/ |
All times are GMT -5. The time now is 12:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands