Short Video My Wife Shot...
 

Did your wife actually say (in sotto voce) “vroom vroom” ? ... :nod::icon_tup: That’s the best!

Ha! She sure did. She's the best :)

2021 Big Update [Pics and Vid]
 

So, I wanted to give an update on the car, since it’s been so long.

From the time I bought the car, I knew that I would eventually need to decide whether to rebuild the 12A or get a 13B. Early last Summer, it became clear that the time had come. The car still drove well, but the oil control rings were pretty much completely finished.

I knew that whatever route I went, I wanted to keep the flexibility and the raw, vintage analog feel of the car in tact.

To keep a long story, not so long…after a lot of reading, thinking, consideration and consulting, I decided to go with a 4 port Renesis, with a custom Holley carb.

Here’s the rundown:

4 Port Renesis (port matched)

Renesis rotors modified to accept Turbo II apex seals/FD corner seals

12A front cover

12A distributor

Custom intake manifold with Holley 600 CFM carb

FD oil pressure regulator

Modified engine crossmember

Dual MSD ignition

ACT Stage 2 clutch

Lightweight flywheel

Custom 2.5 inch dual resonated exhaust w/old-school RB Primaflow muffler



The car feels and sounds absolutely AMZAING. It’s every bit as smooth and docile as the stock 12A was (which was important to me), and nearly as quiet. It’s actually quite “torquey” in every gear, with no need to downshift from 5th to pass (quickly) on the highway.

Mind you, it’s only quiet and docile, with a light foot. Once the secondaries open, it turns into a bona fide SCREAMER. It definitely has two distinct personalities, and they’re both incredibly fun and enjoyable.

It made a little over 175 rwhp on it’s preliminary tune, with the hp/tq figures climbing in parallel. Both were continuing to climb when my builder let off, at 8k RPM… No one at the shop had ever seen a dyno plot quite like it, and it was a rotary shop!

Needless to say, I’m more happy with the car than ever. I had my dad take it out for a highway drive last week, and he was extremely impressed. He said the changes effectively took everything he enjoyed about the original car back in ’79, and increased them exponentially.

He had it SCREAMING to just over 8k in 2nd gear, and was in disbelief at how smoothly and QUICKLY it got there. He absolutely LOVED it!

So did I.


https://cimg4.ibsrv.net/gimg/www.rx7...0cf9cb6bcd.jpg
https://cimg6.ibsrv.net/gimg/www.rx7...1980c26adc.jpg
https://cimg7.ibsrv.net/gimg/www.rx7...6968aaacd9.jpg
https://cimg9.ibsrv.net/gimg/www.rx7...936aa13bd2.jpg
https://cimg0.ibsrv.net/gimg/www.rx7...4a82c847fc.jpg

That car looks absolutely beautiful YELLOWGSLSE. Nice work and photography.

All that work in the engine bay requires some photos with the hood up.

Really beautiful car.

Yup: we need some pics of the engine bay for sure! The car sure is superfantastic...

Not the best shots, but they're all I have for now. That's my dad checking it out...

https://cimg8.ibsrv.net/gimg/www.rx7...04416ec994.jpg
https://cimg0.ibsrv.net/gimg/www.rx7...93c85565a1.jpg

Awesome video! Great work on the car!

Thank you!

How did that setup cost you? Iv been considering that exact same swap whenever my 12A finally decides to go to the 7th circle of rotary heaven.

To be honest, I've never really totaled everything up. It was close to a 9 month process, with parts purchased on the fly.

Labor alone was about $2,400. With the cost of the engine, seal kit, clutch, and all other miscellaneous parts, it was probably in the neighborhood of $6,500-$7k.

I would love to see some pics of your modified crossmember and oil pan.

i like the progress you've made. the car definitely sounds like real joy to drive. good for you!

Thanks man. And yes, the car is extremely enjoyable to drive.

Sorry for the late reply. I believe my builder sent some pics of those during the process. I'll take a look and share what I find.

New video
 

I'd been noticing a clean 280ZX driving around my area for the past couple months. I decided to flag him down a couple weeks ago, when I was driving the 7. Turned out, his car was a semi restored '79. I came up with the idea of having a video done featuring both cars, so I contacted the guy who did the previous video of my car. We made arrangements, and this is how it turned out.

Enjoy!

Damn! Those both look so badass. What timeless designs and such excellent examples.

So cool, and your video guy makes them look even better!

So if I dropped $20k on a balanced up grade of my 1983 fb in 2004, instead of buying a new rx-8, I would have something better than the rx-8 !

minus two the rear seats and those cool suicide doors.

That was an awesome video.... beautiful SA ....

Thank you!

Phillip, this car has come a long way and is absolutely incredible in every regard!!! You inspire me to do a Renesis 4 port swap in an SA or FB and im a guy that likes his cars all original! I may or may not have a 4 port Renesis engine in my garage haha! I would love to get in touch with you regarding more details of your build. I'm thoroughly impressed and inspired! Well done sir!

Thanks so much for that, man. I'd be more than happy to share any and all details. Feel free to get in touch here, Facebook, or wherever.

@YELLOWGSLSE beautiful ride!!!

I need to have mine painted and love the color. Can anyone provide a color code for this color?