|
FB TurboII S366 Short Clip
Just wanted to share this link of my 1985 RX7 with an BW S366... Let me know what you guys think...
|
Many Thanks to kevinbtz for turning my car into what it is now...
|
Niiiiiiiice, 13bt severly tuned - fun to watch :biggrin:
|
Originally Posted by lindahlish
(Post 11383814)
Niiiiiiiice, 13bt severly tuned - fun to watch :biggrin:
|
Sweet!
I have the same turbo for my REW GSL-SE swap |
Originally Posted by estevan62274
(Post 11383958)
Sweet!
I have the same turbo for my REW GSL-SE swap it is by far the best turbo for this set-up sounds and performs great. |
Wow man. Whats your exhaust setup? That sounds delicious.
|
Flowmaster muffler 3" full mandrel bend no cat. "two flowmasters"
|
Originally Posted by TainoCo
(Post 11384367)
Flowmaster muffler 3" full mandrel bend no cat. "two flowmasters"
Excellent build sir. Links to pics? Geoff |
Will post pics this weekend... And Thanks! Kevinbtz on here did the work.
|
It has turned into one fast sleeper, 60-90mph in 2.5 seconds in 3rd gear, and tons of pull before max boost set at 16psi. The exhaust system is 3" mandrel with a magnaflow as a pre silencer and a huge diesel magnaflow with a 5 inch turndown tip as the muffler.
|
All thanks to you kevinbtz :)
|
Originally Posted by kevinbtz
(Post 11384467)
It has turned into one fast sleeper, 60-90mph in 2.5 seconds in 3rd gear, and tons of pull before max boost set at 16psi. The exhaust system is 3" mandrel with a magnaflow as a pre silencer and a huge diesel magnaflow with a 5 inch turndown tip as the muffler.
|
Here are a few pics of exhaust will take pic of muffler later today.
RX7Club.com - TainoCo's Album: Exhaust - Picture RX7Club.com - TainoCo's Album: Exhaust - Picture RX7Club.com - TainoCo's Album: Exhaust - Picture |
Originally Posted by TainoCo
(Post 11384146)
it is by far the best turbo for this set-up sounds and performs great.
What engine porting are you running? And are you in the stock rear still?? |
Originally Posted by lindahlish
(Post 11384563)
Nice setup, awaiting build pics.
Originally Posted by estevan62274
(Post 11385103)
Yeah I can't wait for it to be completed
What engine porting are you running? And are you in the stock rear still?? Mild Intake and Large Exhaust Porting Yes, Stock rear will get change to possible 8.8 if all goes well |
Here are the other photos, rained the day before had to give it a quick wash... lol
RX7Club.com - TainoCo's Album: Exhaust - Picture RX7Club.com - TainoCo's Album: Exhaust - Picture RX7Club.com - TainoCo's Album: Exhaust - Picture RX7Club.com - TainoCo's Album: Exhaust - Picture |
Very nice. Looks like it rides a scoshe low in the middle section - any clearance problems with the middle section? Hows your ride height?
Looks like a custom fab downpipe - 3" ? |
Yep 3", custom downpipe with a Borg Warner Vband adapter. The mid pipe is a tad low, and you can drag it a little if you find a rutted out driveway however the car is also slammed on stock wheels. We will be putting bigger rubber/tires on it (255/40/17) and raising the car up around 1 1/2 inches and should have absolutely no problems then.
|
Finding the dang right wheels is a challenge but we'll find some soon probably custom made.
|
Oooh nice! Snap some pics when you get them on there.
What sort of a suspension setup you looking to run? |
Right now we have ground control coilovers up front and spring at rear with caster/camber plates.... We can raise the front up if needed as well with the rears
|
Tokico 5 way adjustables all around
|
Love the car man! Got me missing mine :(
More videos please :D . |
Lol, thanks... Am actually finishing one up right now... Nothing special just want to share how it sounds inside and out... Will post link on this thread when done.
|
| All times are GMT -5. The time now is 09:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands