(ENGINE) TII swap into GSL-SE
my friend has an 84 SE and wants to put a JSpec 13BT in it. we were wondering, aside from the engine, what will he need to make it a success? id search but its down. thanks
|
Get your ass on AIM and I'll tell you...
|
:rofl: :crackup:
|
i am not sure, but i would imagine that you would want the tranny too. and ofcourse the alternator, wiring harness, and either the tII ignition or some aftermarket one.
|
Re: TII swap into GSL-SE
See my links below..
|
is the rx7 came with the 13b from the factory, you can swap with no problem the only problem will be is the wiring. si mo the same :D that my opinion:bigthumb:
|
eddie the engine might fit peachy-keen with the 1st-gen front cover and oil pan but you'll need to use the T2 transmission...
|
Originally posted by peejay eddie the engine might fit peachy-keen with the 1st-gen front cover and oil pan but you'll need to use the T2 transmission... You can use the SE tranny (or even 12A Tranny) with a lightweight TII Racing Beat Flywheel and the TII counterweight. |
You could, just stock them like cordwood in the garage and plan to get good at changing them... :)
|
Originally posted by peejay You could, just stock them like cordwood in the garage and plan to get good at changing them... :) Oh yeah, about the TII swap, have fun with the wiring :) |
check out NOTA-V6's site, don't have the link off hand Ill get it later. He's putting a 13BT in his 85 SE. :)
|
Click my car below. :)
I'm just getting ready to start putting things back together now. More info is available at these fine sites, brought to you by insane rotary fans all over. :) http://www.geocities.com/chris32472/ http://groups.yahoo.com/group/turbof...portRows&tbl=2 http://groups.yahoo.com/group/turbofb/ http://turbo1stgen.rx-7.org/ MODS:Could we make this a sticky and let the other turbo 1st gen guys pile information here? This thread seems to be coming up quite a lot lately... Thanks, |
Ok now I see why its a sticky... A day late and a dollar short for me.. I could have used thise links a week back :)
|
Originally posted by MIKE-P-28 Ok now I see why its a sticky... A day late and a dollar short for me.. I could have used thise links a week back :) I have been doing homework on this pretty aggressively for the past few months. Hey, at least we can all benefit from it, and help each other that much more :D . |
Originally posted by Directfreak Hey, at least we can all benefit from it, and help each other that much more :D . |
Originally posted by NOTA V6 Amen! We need not only to keep these old beasts in good shape and on the road, but also able to leap tall 3rd gens in a single bound. :D |
You need to aim higher. ;)
|
man...
maybe I should buy an SA22 |
BOOSTEDROTORS.. I did the swap with no problem it went in like a glove , My car is a 1984 GSL i have a 88 Turbo II J-SPEC engine in it from Corksport me and couple friends rebuilt and Streetported, chromed out the housings painted it gloss black had the whole engine bay painted gun metallic silver people love it everything pretty much goes in straight with the Turbo II tranny, just have to make a custom drive shaft and you better work on the rear end becouse i have another friend who did the 93 swap into a GSL-SE he broke the rear end it's alot of power but at the end people admire it when they see it, also good luck finding people who can re-wire it, i would just get the haltech also don't throw any 12A parts they are usefull.
Jaan M. SilverboyRacing 1984 Mazda RX7 "88" Turbo II Motor j-spec |
nice thread guys, i geuss ill add my lame photo link hehe www.photopoint.com visit rx7power then album ass some nice pics of where my rx7 is sitting :(
|
Great Linkz.. ()utstanding!!!
br0.. great links..even though I have most of them..I think posting them was a great idea. I just notice how few turbocharged 1st gens there are out there. I've searched the internet for years but found only a handfull.
On a sidenote.. a friend of mines.. asked me to make him some clear tail lights for his 1st gen. If you guyz like.. I'll post the steps. The clear tail lights.. and a set of LED bulbs.. should give the back of the 1st genz a updated look. |
Anyone want a great attitude booster?! Go to Mazdaracing.com. If you go to the Videos section, there's a Carburated 12a 1st gen RX-7 beating the snot out of a Nova with a 302 and a brand-new mustang, with plenty of mods done to both!
I'm not endorsing street racing by showing these video's but it pretty damn cool. And the RX-7 kicks ass! You can see the horns from the carb sticking out of the hood. |
I recently dropped a Series 5 13B Turbo in my Series 2 and used:
1990 13B Turbo Turbo 5-speed Modified Tailshaft 13B series 2 crossmember pre-pump, surge-tank, return-lines, high-flow fuelpump Microtech MTX-8 Computer Turbo_smart Boost Controller Turbo_smart Type 3 BOV frontmount intercooler with 2.5" SS piping 3" Mandrel-bent exhaust with SS turbosmart muffler 3" high-flow cat plasma-cut plate for mouth of turbo/wastegate |
Dyno tuned yet? Do you have the Dyno charts? Can we see? :D
Mmmmm!:yum: turbo 1st gens... |
All times are GMT -5. The time now is 01:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands