Interior / Exterior / Audio Talk about interior and exterior mods including audio.

RX7 Veilside Fortune Kit - Headlights and Rear Lights

Thread Tools
 
Search this Thread
 
Old Jan 28, 2011 | 11:29 AM
  #1  
jase03's Avatar
Thread Starter
Full Member
 
Joined: Jan 2011
Posts: 100
Likes: 0
From: Philippines
RX7 Veilside Fortune Kit - Headlights and Rear Lights

Hey everyone I know theres a tonne of these threads open, but I just wanted to ask you guys what would be the closest comparison in terms projector headlights to the veilside fortune headlights and also for the tail lights.....


Cheers
Reply
Old Jan 28, 2011 | 11:45 PM
  #2  
Fortune_Seven's Avatar
Snowboarding Whistler!
Tenured Member 10 Years
iTrader: (24)
 
Joined: Nov 2002
Posts: 1,285
Likes: 0
From: Whistler, BC
Fortune kit doesn't come with taillights. Not to mention If your not buying the Fortune Kit, then you can't get the headlights either.

There are some great options for HID headlight kits, do a search.
Reply
Old Jan 29, 2011 | 04:57 PM
  #3  
PGBrian's Avatar
Full Member
 
Joined: Aug 2009
Posts: 63
Likes: 0
From: Long Beach, CA, USA
The taillights are stock from the rx7.

The actual headlights are from HELLA and are also offered in HID, but they are SUPE Rexpensive if you go that route.
Reply
Old Dec 6, 2011 | 03:06 AM
  #4  
Silhouette's Avatar
Like Whiplash in a Bottle
 
Joined: Dec 2009
Posts: 26
Likes: 0
From: Johannesburg, South Africa
Hey Guys,
Those of you like me who own a fortune kitted FD will probably sooner or later run into the issue with your headlight covers getting busted/cracked, scratched etc...

Happened to me and I'm in South Africa so I struggled trying to get new covers from VS, apparently they also don't sell the parts individually as I also ended up with a busted center spoiler and had to improvise there..

Anyway, got to the point where it all seems like too much hassle for a small thing, so I figured "Come on, how hard can this Sh£@ be?!?!?" So I made myself new headlight covers, it cost me R210 which I think is about $26 and they look good, plus now I have a couple of spares for the next time.

Was wondering if there would be any interest in sharing how I did it? It wasn't hard but it may save some of you a bit of time with some silly mistakes I made in the begining. If there's any interest inbox me or whatever and I'll mail you my process as I took some pics along the way.

If this is irrelevent, just ignore. For all I know in the US you guys can get original covers easily or for less. Anyway, just adding my little bit of help in case someone needs it.
Reply




All times are GMT -5. The time now is 06:25 AM.