Stock 460cc injector latency / lag time
#1
Pink Taco Expert
Thread Starter
iTrader: (1)
Join Date: Jun 2005
Location: Napa, Ca
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Stock 460cc injector latency / lag time
Im working on a custom Turbo IS300 project and am running 460cc high imp injectors from an NA 2nd gen. Im trying to figure out if the difference in latency is causing my weird startup/idle problems. I searched as best as I could and couldnt find the info I was looking for. Anyone know the stock dead time of these injectors?
#2
Pink Taco Expert
Thread Starter
iTrader: (1)
Join Date: Jun 2005
Location: Napa, Ca
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
IM going to pop this one back up seeing as how Im diving back into my IS project, still looking for these deadtime numbers, closest answer I have is .74ms but not 100% sure.
#4
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
Is that for low impedance or high impedance 460cc injectors? The low impedance 550cc injectors are 0.75ms @ 13v, so I would expect the low impedance 460cc injectors to be about the same. I wouldn't be surprised if the high impedance 460cc injectors were 1.0ms.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
armans
3rd Generation Specific (1993-2002)
5
08-15-15 09:08 PM