I am trying to piece my fuel system together and new injectors are needed. I've done some calculating at witchhunter and came up with about 959cc for each injector...values were set at 450FWHP, .65 for BSFC, and 80% duty cycle. Are those values about right? I'd rather keep all four injectors the same cc to avoid staging.

I've roughly tuned a 13BT with 4 1000cc and a T04R and it worked well.

I guess my question comes down to will 4 1000cc injectors be enough?

 

uhhh if it was enough for a to4r it will definatly be enough for a 60-1