Interior / Exterior / Audio Talk about interior and exterior mods including audio.

what you guys think about this rims

Thread Tools
 
Search this Thread
 
Old Jul 26, 2004 | 01:46 PM
  #1  
MR_Rick's Avatar
Thread Starter
Planning my come back
Tenured Member 20 Years
iTrader: (7)
 
Joined: Feb 2003
Posts: 3,393
Likes: 0
From: Austin, Tx
what you guys think about this rims

I ran accross this rims but not too sure on the off-set.
http://www.discounttiredirect.com/di...p=5-114.3&rw=9
If they do fit, what is the widest tire I can go with on the front and back?
Reply
Old Jul 26, 2004 | 01:50 PM
  #2  
apneablue's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member 20 Years
 
Joined: Feb 2002
Posts: 3,045
Likes: 2
From: North Coast
they look good....don't know much other than that...price is good too
Reply
Old Jul 26, 2004 | 03:37 PM
  #3  
rynberg's Avatar
Lives on the Forum
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
18x9 +38 will rub in front
Reply
Old Jul 26, 2004 | 04:03 PM
  #4  
MR_Rick's Avatar
Thread Starter
Planning my come back
Tenured Member 20 Years
iTrader: (7)
 
Joined: Feb 2003
Posts: 3,393
Likes: 0
From: Austin, Tx
Unhappy

well if you go to discount tire and sellect our car, they say it will fit but I'm not to sure. Man why is it everytime I find a set of wheel that I like they don't fit

Last edited by MR_Rick; Jul 26, 2004 at 04:07 PM.
Reply
Old Jul 26, 2004 | 04:10 PM
  #5  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
Originally Posted by hondasr4kids
well if you go to discount tire and sellect our car, they say it will fit but I'm not to sure. Man why is it everytime I find a set of wheel that I like they don't fit
Technically, it will "fit". However, as Rynberg pointed out, you will most likely get some rubbing with that width and offset. Rolling the fenders may help, but it will most likely crack your paint doing it.
Reply
Old Jul 26, 2004 | 04:28 PM
  #6  
MR_Rick's Avatar
Thread Starter
Planning my come back
Tenured Member 20 Years
iTrader: (7)
 
Joined: Feb 2003
Posts: 3,393
Likes: 0
From: Austin, Tx
yeah I figure that, I will just stick to the SSR comp's or Volk GT-A's.
Reply
Old Jul 26, 2004 | 04:56 PM
  #7  
MR_Rick's Avatar
Thread Starter
Planning my come back
Tenured Member 20 Years
iTrader: (7)
 
Joined: Feb 2003
Posts: 3,393
Likes: 0
From: Austin, Tx
well I just found this one too


18 x 8.5 and 9.5 with a 45mm offset
Reply
Old Jul 26, 2004 | 08:01 PM
  #8  
POM HB's Avatar
Lookie Only
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 1,073
Likes: 1
From: King, WA
hondasr4kids,

Is the first one on the picture 'Axis' too? Will 9.5 w/ 45mm offset fit the front?

Edit: I've been wanting five evenly spokes wheel in black with some lips for a very long time. The closest one I've seen is RacingHeart C-5 from wheelnext. But, haven't call them to check out the size, offset, and pricing.

Last edited by POM HB; Jul 26, 2004 at 08:06 PM.
Reply
Old Jul 26, 2004 | 10:51 PM
  #9  
MR_Rick's Avatar
Thread Starter
Planning my come back
Tenured Member 20 Years
iTrader: (7)
 
Joined: Feb 2003
Posts: 3,393
Likes: 0
From: Austin, Tx
yes they are both axis reverbs
Reply
Old Jul 26, 2004 | 11:28 PM
  #10  
spoolin93r1's Avatar
Rotary Freak
 
Joined: Oct 2002
Posts: 1,625
Likes: 0
From: Salem, IN
Originally Posted by rynberg
18x9 +38 will rub in front
very slightly. i have 18x9 +40 with 255's. the only rubbing i get is under hard cornering on the front left. the right never rubs, or at least i can't tell. all my fenderwells are 25 inches from the ground as well. they will fit, but may want to keep the car at a decent height
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tylerx7fb
1st Generation Specific (1979-1985)
39
May 27, 2019 12:45 PM
Clacor
Single Turbo RX-7's
0
Aug 14, 2015 09:17 AM




All times are GMT -5. The time now is 06:25 AM.