New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

jdm with no boost

Thread Tools
 
Search this Thread
 
Old 02-26-16, 01:42 AM
  #1  
Junior Member
Thread Starter
 
97jdmryan's Avatar
 
Join Date: Feb 2016
Location: quesnel
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Question jdm with no boost

After doing some reading I have found that myvacum reading of -450mmhg seems to be ok at idle when I give it gas it spikes up to about 1psi sorry for switching back and forth from metric to standard lol. I pulled the bov out of the intercooler pipes and still no boost? When I pull the connector off the top of the turbo I can feel alot of air blasting out of the turbo.. do I have to be driving to get boost over 1psi? Had good boost on twins until primary blew. Now having troubles figuring out why I don't seem to be getting boost. Oh yes alsojust did single conversion.

Last edited by 97jdmryan; 02-26-16 at 01:43 AM. Reason: added more
Old 02-26-16, 07:11 AM
  #2  
Junior Member

 
warpig's Avatar
 
Join Date: Jan 2015
Location: ohio
Posts: 33
Likes: 0
Received 1 Like on 1 Post
boost only builds under a load
Old 02-26-16, 11:57 AM
  #3  
Junior Member
Thread Starter
 
97jdmryan's Avatar
 
Join Date: Feb 2016
Location: quesnel
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Yes ok thanks I felt like a bit of a goof asking but thanks. I guess the single turbo conversion turned out good
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rendell
New Member RX-7 Technical
4
02-13-16 03:42 PM
Show_off
3rd Generation Specific (1993-2002)
12
02-08-16 12:41 AM
chap2700
2nd Generation Specific (1986-1992)
5
02-01-16 06:46 PM
Michael Mansour
New Member RX-7 Technical
4
01-28-16 09:53 PM



Quick Reply: jdm with no boost



All times are GMT -5. The time now is 03:07 PM.