Help with my scale RX7
#1
Newbie
Thread Starter
Join Date: Apr 2007
Location: Poland
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Help with my scale RX7
Hi all, I'm new here and I'm from Poland.
I'm making a plastic model of Mazda RX-7 R1 and need some help with engine and undercarriage detailing (wires, parts etc.). Here You can see my progress withi this job :
I would be very thankfull if You give me some advices where I should make wires, mark on engine's photo which part is which (cause I don't know which part is braking pump etc.)
I hope that You'll help me with finish progress of my Mazda
Cheers
I'm making a plastic model of Mazda RX-7 R1 and need some help with engine and undercarriage detailing (wires, parts etc.). Here You can see my progress withi this job :
I would be very thankfull if You give me some advices where I should make wires, mark on engine's photo which part is which (cause I don't know which part is braking pump etc.)
I hope that You'll help me with finish progress of my Mazda
Cheers
#3
Moderator
iTrader: (7)
Take a look at this thread:
https://www.rx7club.com/3rd-gen-archives-73/tech-manual-directory-614824/
You can download the parts diagrams and service manual. That will show you where/what all the major parts look like. For color and texture, run some searches in this forum for pictures.
Dave
https://www.rx7club.com/3rd-gen-archives-73/tech-manual-directory-614824/
You can download the parts diagrams and service manual. That will show you where/what all the major parts look like. For color and texture, run some searches in this forum for pictures.
Dave
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM