Wolf internal map sensor question
 

Ill go into detail if someone wants to know why, however ill just ask what i want up front

My book states the max pressure the map sensor can read is 23psi of boost which would be 107% load, which would put 20psi at 100% load

Does this mean for every 1psi ABSOLUTE i get .343% load on that scale?

It makes sense because that puts load 41 at high 13.xxx which is correct for atmospheric for my elevation

-Jacob

never mind, i was right (well very close)

using that math and a 0-5v 3bar map sensor i now have a channel in my innovate's logworks that is LOAD and it directly correlates to wolf's load on the 20psi scale

The Wolf scale is 255/107% = 2.3832 ...100 % = 238 or EE Hex as Raw data.
5 Volts / 255 = 0.0196 Volts per 01 Hex. (Raw data).

And Also you are right!!

Thanks Jacob

Cheers
Michael Smith