running rich on idle/im new on this
 

Hi guys i have a 1989 fc turbo II. when i start her it will start but it blows alot of smoke and smells gas. it says on the webo2 reading at 12.5 at idle but i could smell the fuel. after a run her and let her sit for about 30mins it won't start. i have to clear alot of fuel on the motor and replace the sparksplugs again before it will start back up.

here is the list of mod maybe you guys could help....

550cc pri/ 1600sec
stock turbo ported
walboro 255lph
front mount intercoller..
wolf 3d 4v
stock cas

here my map hope somebody could help

Yep I can see your problem... under staged injection you are bringing on the secondarys before 1500 rpm. Would you like me to setup your fuel for you from 0 load to the transition of boost 36% load?:Kill1: Also you are not using the idle speed control form the Wolf are you? :squint:

Cheers
Michael Smith

Hi! Micheal Smith,
Yes!!! PLS. the reason I'm not using the idle speed control form of Wolf is because i don't have the BAV. My manifold is a modified. i'm running Premix fuel also as my oil metering was taken out if this matters..
How could i eliminate the secondary to fire up before 1500 rpm?
I'm new on this setup so i need all the help i need...

i know that it's alot of fuel when i start the car, sometimes it won't start because it flooded of fuel. i have been buying sparkplugs left & right becuase there fooled.. i hope it will fix the problem. I don't have any problem on running the car it pulls hard on boost don't misfire . the only thing is at idle it smells fuel and smoke...

thx genefc3s