|
Hot start issue, is it my settings?
Well up untill today, my car hasnt had any hot start issues, howver starting today, after being up to temp, sometimes if i let it sit and idle, tought the throttle it will stall, and then refuse to start
8.xxms of fuel on stock cosmore injectors (550's?) and 14.1deg of advance for starting. Sometimes if i shut it off in a hurry and it sit's and heatsoaks i have to pull about 1.5ms of fuel and it will start up, today though it didnt help anyone ever hurd of this? cosmo re, stock port with a 550's and 1600's on a wolf3d v4 |
post your map. I'd like to take a look at your starting compensation maps.
Also, make sure your water temp sensor is calibrated right. I posted a map with the proper settings for the bosch M12 sensor that it came with recently since the map that came loaded in the wolf for it was WAY off.
Originally Posted by CrackHeadMel
(Post 7175712)
Well up untill today, my car hasnt had any hot start issues, howver starting today, after being up to temp, sometimes if i let it sit and idle, tought the throttle it will stall, and then refuse to start
8.xxms of fuel on stock cosmore injectors (550's?) and 14.1deg of advance for starting. Sometimes if i shut it off in a hurry and it sit's and heatsoaks i have to pull about 1.5ms of fuel and it will start up, today though it didnt help anyone ever hurd of this? cosmo re, stock port with a 550's and 1600's on a wolf3d v4 |
| All times are GMT -5. The time now is 09:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands