where to take my FD for a new motor ????
where can i get a motor built and a car built in southwest
so cal so nevada or arizona new to west coast i have 1 FD and want another i have 4 FC 's and a rx2 need help please chris brown |
you can take it ot me if you feel like driving to california. 2-3 hrs.
or hit up steve-- he lives by you. |
to rotaryextreme shop in north ca or give them a call for more info 510 683 8850
ask for Chuck |
thanks for replys
I can bring it to you in so cal
i will be that way later in the fall and can bring out the car so you can drive it and keep it a day or so why would the car not have smooth power ? all stock borla exhaust 34000 miles |
steve?
i dont know steve
|
i think steve's name is gonzz or something like that.
i'm down to rebuild if that's what it needs, but it's a LONG drive just to find out... |
met steve i belive yesterday
i belive his car is on ebay
one of them anyway my 93 R1 stock 34000 miles borla exhaust it just hesitates under hard power its all but perfect i want it to run that way be cool |
also so why guitar junkie
I'm a sound man
just wondering cooldudeproductions.com |
Get a compression check.
|
eh, make sure the map sensor is plugged in.
|
Southern California: Rotary Reliability & Racing in Santa Ana (714) 641-2980, Tripoint Mazda Engineering in Canoga Park (818) 348-5385, R&R Rotary in Upland (909) 593-8080, Mazdatrix in Signal Hill (562) 426-4460.
|
^^^ All are great places to get your engine rebuilt.
|
Doesn't sound like an engine rebuild problem... I don't know FDs though.. power/idle problems... that's diagnosis material, need to get someone with experience to take a look at it. Dunno if GuitarJunkie would want to do that, he seems more into rebuilding not general mechanic-ing. ;)
--Gary |
i'm the one who suggested finding the problem out before rebuilding it.
and yes, i'm well versed in general mechanic stuff. i've even got the ase's a6, a8, l1, 2 smog certs, obd2 cert and a couple other papers to stick on the fridge. i used to be a real mechanic before i started playing with triangles :p: |
Originally Posted by GUITARJUNKIE28
i used to be a real mechanic before i started playing with triangles :p:
I'm sure you know your shit more than me though and just got them to put a smile on your customer's faces, not to get work. =) And I figured you'd just be too busy with rebuilding engines to be working on little things like shifty idling FDs. ;) I fixed my shifty idle yesterday with a major TPS adjustment.... that was expected though, I was just being lazy and not getting around to it. ANYWAY, if the guy wants to drive out here to get it checked out I guess that's cool... lots of shops down here can diagnose that kind of problem too. --Gary |
actually, the place i was working at at the time gave me a raise when i got the l1...since i was in school anyway...
that's one cert i think everyone should have... it's all about shit going wrong with computer systems and how to fix it. that's about the only thing i learned in school that i actually use every day of my life. hail to the triangle! |
R&R Rotary in Upland (909) 593-8080 ask for Steve ;)
|
Originally Posted by MrFuzzy
R&R Rotary in Upland (909) 593-8080 ask for Steve ;)
|
cool guys but
Mazdatrix had my FC TII and was asked to do service on injectors and tune the car plus trans clutch and rear main seal
witch they did all that but they would not drive my car yea sure it reved and idled but it would nor run past 3500 rpm at all while driving john was my mechanic he had the car 1 week i called him and he would not come to the phone on 3 seperate occasions so i would hesitate to go back rotary relieability said go to mazda trix they just sell parts ive tried for a week to talk with tri point but there too busy to speak to me i must have a big billboard in LA that says im a looser or something pettit built all my cars and they know me and i them but florida is a little far fom me now im currently building 2 FC cars 1 na and 1 TII and my FD is just not happy but is a good car so i really need a good relationship with a builder of cars not just motors and ill go to florida if i have to distance is not the issue quality and integrity are thanks guys |
I personally recommend Robert from Rotary Shack (www.rotaryshack.com) 'cause he's a friend... he takes a while to get shit done 'cause he's always busy playing with the bird or the squirrel but he know what he's doing. ;)
He's around the on the boards, mostly sticks to the FB stuff... doesn't like working on FDs much, FCs are fine though. He's good at putting a whole car together. Just remember he takes his time... and he does things the way you want.. if you wanna go cheap, results are gonna be working but cheap... he won't bullshit around about what you get for the money like some places... he'll tell you how much it'll cost to be done the "right" way, and if you don't wanna pay it then you can go for the lesser options lol. I'd offer my services... but I only know FCs and don't really deal with turbo (yet hehe) so I'd only be good for putting together a nice N/A 2nd gen.. mmmm.... 2nd gen.... --Gary |
i would recommend myself, but i'm so busy lately, i probably couldn't touch it for a month or two. :p:
|
Originally Posted by Bob_The_Normal
I personally recommend Robert from Rotary Shack (www.rotaryshack.com) 'cause he's a friend... he takes a while to get shit done 'cause he's always busy playing with the bird or the squirrel but he know what he's doing. ;)
He's around the on the boards, mostly sticks to the FB stuff... doesn't like working on FDs much, FCs are fine though. He's good at putting a whole car together. Just remember he takes his time... and he does things the way you want.. if you wanna go cheap, results are gonna be working but cheap... he won't bullshit around about what you get for the money like some places... he'll tell you how much it'll cost to be done the "right" way, and if you don't wanna pay it then you can go for the lesser options lol. I'd offer my services... but I only know FCs and don't really deal with turbo (yet hehe) so I'd only be good for putting together a nice N/A 2nd gen.. mmmm.... 2nd gen.... --Gary |
Haha, what are you looking for TurboVert? Just an S5 longblock? shortblock?
I can get a hold of him and see what he can do. --Gary |
im going to try tri point
thanks guys
its a whole custum build ground up |
eh...maybe i will recommend myself--if you can wait til september.
|
All times are GMT -5. The time now is 05:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands