![]() |
^ Sounds fun. I'll see if I can make it.
|
ok..change of plans again..... i worked it out to where i go and pick up the cams, but will install them later..... now im back on for the race this weekend!
|
kick ass!
|
Seems like I cracked an apex seal during the practice on sunday. Car idles rough and with low vacuum, but drives normally albeit with a little less power. Compression test verifies:
2/3 faces on front rotor with lower compression, absolute compression is 100+ rear rotor absolute compression is 90, but even pulses. Looks like I can reuse everything 'cept the seals Time for a rebuild :( Not bad for a J-spec that's lasted me 2 years! I'll be out of it for a while, until I am able to rebuild it. See you after I get it running again! |
$800, Jesse. Lightweight lugnuts included too.
|
Originally Posted by MaczPayne
(Post 8914236)
Seems like I cracked an apex seal during the practice on sunday. Car idles rough and with low vacuum, but drives normally albeit with a little less power. Compression test verifies:
2/3 faces on front rotor with lower compression, absolute compression is 100+ rear rotor absolute compression is 90, but even pulses. Looks like I can reuse everything 'cept the seals Time for a rebuild :( Not bad for a J-spec that's lasted me 2 years! I'll be out of it for a while, until I am able to rebuild it. See you after I get it running again! |
Originally Posted by MaczPayne
(Post 8914236)
Seems like I cracked an apex seal during the practice on sunday. Car idles rough and with low vacuum, but drives normally albeit with a little less power. Compression test verifies:
2/3 faces on front rotor with lower compression, absolute compression is 100+ rear rotor absolute compression is 90, but even pulses. Looks like I can reuse everything 'cept the seals Time for a rebuild :( Not bad for a J-spec that's lasted me 2 years! I'll be out of it for a while, until I am able to rebuild it. See you after I get it running again!
Originally Posted by andrewdruiz
(Post 8914254)
$800, Jesse. Lightweight lugnuts included too.
|
yeah that sucks... hope your back up soon!
|
Sorry to hear the news Johnson. That isn't bad for a J-spec block though. GLW rebuild!
|
It couldn't have happened at a worse time too. We have too many projects going on at our house, so I have no room to bust out a rebuild in short order at the moment. Will probably get a shop to do a quick rebuild on my shortblock if it's cheaper and faster than me doing it. I just need the motor to last me till graduation, when the real build starts!
Driving the Jeep for now :) Looks like I'll be taking that to Dave's memorial run! |
it's cool, I'll be rockin a chevy cobalt at the dave run. :)
Hey Rob, dont you know someone that does rebuilds? |
Originally Posted by speeddemon32
(Post 8915061)
Hey Rob, dont you know someone that does rebuilds? |
gotcha.
|
Looks like this'll be my new organization after I move.
http://www.arscca.org/ Arkansas, ughhhh Events look closer than other in TN. |
Originally Posted by Michael Knight
(Post 8919105)
Looks like this'll be my new organization after I move.
http://www.arscca.org/ Arkansas, ughhhh Events look closer than other in TN. |
I won't be there tomorrow Casey.
|
^bummer
|
yeah, thats sucks man. :-(
I ran a 62.8xx woot woot. results are up. https://axwaresystems.com/axorm/file...020109_fin.htm if that does not work, try this.: https://axwaresystems.com/axorm/file...020109_fin.htm |
Well it looks like Tabb and her new job have a signed contract and her start date is 4/1/09. However, we probably won't move for a month or 2 after that. Had a great time yesterday! Good seeing everyone!
BTW- Hella good times Jesse. I need some Dunlop's. JK! |
|
yeah... let me guess. you ran a 60.x
just checked... and yup. you ran a 60.x how do you do it man?!?!? Here I thought I did ok, and you pull a time like that in a car that is WAY less prepped then mine. you make me sick. (good job though!) just freakin nuts! so everyone understands, ULLLOSE runs an RX-8 in stock class. he runs light wheels, 245 Kumho race tires, shocks, a cat back, and a rear sway bar.... oh yeah, and a drop in filter. thats it. he cant do anything else. no springs, no front sway, no pulleys, no flywheel, no 285's, no nothin. it truly is a daily driven almost showroom floor vehicle. and he pulls times like a 60 flat. I'm gonna go puke now. I guess thats why your 58 time ntional champion. (what is it now 3 or 4 in BS?) It was nice seeing you yesterday. I have not seen you in forever! did you get a chance to check out super miata? EDIT: I see the siggy says 4 time BS champ. |
oh yeah, check out the video in my signature.
|
Originally Posted by speeddemon32
(Post 8931585)
yeah... let me guess. you ran a 60.x
just checked... and yup. you ran a 60.x how do you do it man?!?!? Here I thought I did ok, and you pull a time like that in a car that is WAY less prepped then mine. you make me sick. (good job though!) just freakin nuts! so everyone understands, ULLLOSE runs an RX-8 in stock class. he runs light wheels, 245 Kumho race tires, shocks, a cat back, and a rear sway bar.... oh yeah, and a drop in filter. thats it. he cant do anything else. no springs, no front sway, no pulleys, no flywheel, no 285's, no nothin. it truly is a daily driven almost showroom floor vehicle. and he pulls times like a 60 flat. I'm gonna go puke now. I guess thats why your 58 time ntional champion. (what is it now 3 or 4 in BS?) It was nice seeing you yesterday. I have not seen you in forever! did you get a chance to check out super miata? EDIT: I see the siggy says 4 time BS champ. The speed, the times and the championships came at the expense of 15 years spent in parking lots autocrossing. :icon_no2: My Dad, who had not turned a wheel at an autox in four years, managed a 64.2 in his first outing in the RX-8. :bigthumb: |
Originally Posted by speeddemon32
(Post 8931589)
oh yeah, check out the video in my signature.
Does your suspension bottom out? Looks like a real bumpy ride. |
oh yeah, my bad. front bar, no rear bar. I almost had it right.
yeah, well the time has paid off. you are truly one of the best. not trying to stroke your ego, just stating a fact. your clearly among the Elite few. Your dad didnt do bad at all. Thats a time I personally would ecpect your average HUMAN to be able to trun in a B stock car given he had experiance. |
All times are GMT -5. The time now is 04:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands