Lug Nuts Question
Well im planning on getting a little bit more offset for my fc (currently using 5mm, trying to go 10mm back and 8mm front)and i was wondering what lug nuts are used for bigger spacers? i need one that goes on a lot more threads than the stock one. Any suggestions?:scratch:
|
Sounds like you want longer studs.
A quick search in the "suspension" forum... https://www.rx7club.com/showthread.p...t=longer+studs |
Anything over 5mm is going to require longer studs or bolt-on spacers. What size/ offest are your wheels now? Also tire sizes. You may want to just go 10mm/ 15mm
|
my wheels are 205/60/r15 yokohomas i was just wondering if there was any lugs that screw in more when i have my 8mm wheel spacer rather than the stock one
|
Originally Posted by Marck
(Post 9795880)
my wheels are 205/60/r15 yokohomas i was just wondering if there was any lugs that screw in more when i have my 8mm wheel spacer rather than the stock one
|
You need longer studs or a studded spacer if you're going to go any thicker. If you try to put a thicker spacer, you're not going to catch enough threads with your lug nut and eventually, they'll back off/fall off/etc.
|
Originally Posted by Marck
(Post 9795880)
my wheels are 205/60/r15 yokohomas
|
i agree with the mustang wheels, i have some for sale for cheap if you plan to pick them up from socal
https://www.rx7club.com/west-sale-wanted-classifieds-195/fs-17x8-mustang-wheels-854807/ |
just get better wheel with better offsets.
|
All times are GMT -5. The time now is 06:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands