New EFR 8474, 9274, 9280 EWG group buy
 

We have started production on another 100 cast ewg long runner FD turbo manifolds, and with the release of the new EFR models we are doing another group buy:

EFR 8474, 9274, 9280 GB

Currently 25 percent of the GB slots have been filled.

Half sold out now.

What's the IWG size on the 9280?

On a 20b, will it be able to keep boost around 12-14psi?

Bump, any info?

All B2 EFRs( 7670 on up) have a 42mm divorced WG in the direct path of flow.

I know of 2 9180 iwg 20bs and they both hold 10 psi to redline.

Have you had an 8374 on a 20b? Would it drop off like a 7670 on a 13b?

I'm only looking to run 15 or so psi. Wherever the power lands is where it lands. But I don't want it to feel like it gets sluggish after 6k rpm

Our 20B sees full boost before we can completely load it on the engine dyno with a 9180, I wouldn't want to even try an 8374.

Oh, that's with a 1.45 turbine housing.

Are the turbos in the group buy available with a black compressor housing? Saw it on the 7670/8374/9180 on another site and kind of fell in love.

8374 is way too small for a 20B.

Will an 8474 fit with a Xcessive LIM in place?

Sometimes yes( bolt in no mods) and sometimes it requires an 1/8" to be milled off the flange that meets the block( or you can grind on the front runner).

BW has let us start placing orders for turbos! This means BW is getting closer. Pricing for turbos only has been updated on our site...

9280 on the way :)

6 spots left before GB closes.

4 left

2

Can't wait.... I imagine most people are like me and wait forever to place orders for things like this. I literally filled the cart 10 times before pulling the trigger, that was across 4 different devices. My FOMO would be through the roof at only two spots. ~Regis

1 left

Any idea when BW will have these ready to ship out? I get my bonus this week, so I'm ready!

Turbos should be in next week !

We do have tracking on our orders. I am pretty sure we have more than anyone in North America too...

GB is now closed! . We are leaving the product page up on our site for reference to those customers who purchased deposits. We have started calling and emailing customers.