FC Master Cylinder Brace
 

http://www.levelzeromotorsports.com/...es/10189_1.jpg

Description

During hard braking, the firewall will flex and deform. This results in decreased brake pedal feel and increased pedal movement making it more difficult to modulate brake pressure.

To improve the feel and allow for more accurate threshold braking we recommend our master cylinder brace. This bolt-on unit attaches to the suspension tower and the stopper presses against the master cylinder. This eliminates firewall deflection under hard braking and the peddle movement is more refined and accurate.

Links to online store

$90 Shipped Worldwide

Notes from author

This was designed for my personal car. Because if this it is drastically over engineered and made with no regard to cast or time. The price might seem a little high but this part is literally made the best that I could with no expense spared. The brace is an inch thick, every edge has been beveled and all the hardware is stainless steel.

AMAZING piece, looks incredible, performs incredible.
AWESOME company to buy from
HIGHLY RECOMMENDED!!!!!

Lloyd

looks awesome can we get it in another color or not even colored

Sign me up for one.

10 minutes later.....
never mind, got one.

This should nicely accent my black and white engine bay.

Sorry I had all of them anodized red. We just finished the current batch, so until we sell a bunch of them, I'm not sure when/if we will be making more.

Thanks. If wont ship until Monday, but you will receive it next week.

How many left in stock?

any pics of it installed ??

hmmm ok ummm still ok to paint even though they are all anodized never dealt with that before

25+ currently. A few are already spoken for, so I don't have an exact number. We are going to try to make more before we run out, but it's always hard to estimate demand/popularity with new parts.

This is of the prototype. There has been 1-2 cosmetic changes, but basically the same part. I'm waiting for the snow the stop so that I can install mine.


http://www.levelzeromotorsports.com/...MC_Brace_4.jpg
http://www.levelzeromotorsports.com/...MC_Brace_5.jpg

Yes you can paint them without a problem. The paint will actually last longer. You could also powdercoat them if you wanted. Anodizing is basically tinting the aluminum. This stops it from oxidizing so that it looks good after being exposed to the weather and makes it more scratch resistant.

technically anodizing is oxidized. :)

LOL I knew someone would call me on that. I was trying to not get overly technical, but you are absolutely correct.

If anyone is curious the wikipedia article (http://en.wikipedia.org/wiki/Anodizing) on anodizing explains the process quite well.

just ordeded one :)
this is off subject a bit but,
i saw you make mounts for the j-body. any idea if your solid lower mount (dog leg) would fit a 1988 v6 cav? i think they were made 88-91

Just got got one.....Been waiting on these for a while.............Damn-it gotta stop spending money on the FC.

hmm then i might just have to order one next week this should go wonderful with my ss braided brake lines

"Thanks" you!:icon_tup:

Nice Piece.

Sorry different chassis. 1995 what the crossover year.

Yes the combination should make for a very firm pedal.

Thanks.

https://fbcdn-sphotos-a.akamaihd.net...18074290_n.jpg heres mine guys. thanks again level-zero

Lloyd

Still in stock and ready to ship.

Pm a price shipped to k0b1m0 canada. Also your paypal

Thank you for the MC brace its very well designed piece. Feels very high quality. Haven't yet driven the car because the alternator died.

Last few of the first batch left, we will be making more but there may be a small window wear they are not in stock depending on how fast the last few go.

PM sent

Replied. In case anyone else needs, the link to the listing on our website is: http://www.levelzeromotorsports.com/...roducts_id=235

Received it today