RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   V-8 Powered RX-7's (https://www.rx7club.com/v-8-powered-rx-7s-299/)
-   -   [Wanted to Buy] 93-95 rx7 with ls swap (https://www.rx7club.com/v-8-powered-rx-7s-299/93-95-rx7-ls-swap-1028696/)

spooled704 03-08-13 04:23 PM

93-95 rx7 with ls swap
 
looking for a 93-95 mazda rx7 with complete LS swap running good no probs.

automationLED 03-09-13 02:58 PM

how much are you looking to spend?

spooled704 03-10-13 01:33 PM

trying to stay around 15grand or so depending on car.

ncaudio 03-10-13 06:05 PM

Norotors.com

spooled704 03-10-13 07:21 PM

ok thank you

mac11wildcat 03-12-13 10:51 AM

not to burst a bubble but $15k for a completed LS swap is pretty low.

digitalsolo 03-13-13 10:26 AM

I've seen plenty of ones that just need a little TLC in that price range, honestly. When you get into the 20k+ range, you're talking very well sorted cars with P/S and A/C, etc. 13-15k will get you a decent condition body, fair interior and a stock motor/trans generally with no P/S or A/C installed.

mac11wildcat 03-13-13 11:37 AM

that is true, but what you described is what i would call a poorly done swap. but thats just me. goodluck OP!

97SupraTwinTurbo 03-13-13 01:40 PM

For 15k, you will not get a nicely swapped car with a samberg swap kit. Quality parts = quality price. We all know you have to pay to play. It will show in the V8 RX7 you purchase, Good luck.

digitalsolo 03-13-13 03:35 PM


Originally Posted by mac11wildcat (Post 11404997)
that is true, but what you described is what i would call a poorly done swap. but thats just me. goodluck OP!

I would call it an unfinished swap, which is not the same as poorly done one. You could get a car with properly done wiring, fuel and cooling for that price range, and there have been more than one Samberg equipped car sell for that price.

Keep in mind, you're unlikely to get what you spent on the car out of it, and I can build an LS1/FD with Samberg stuff, done VERY well, with no A/C or P/S for less than 15k, including chassis.

If you want perfect paint, perfect interior, and ALL functions, you are going to spend 20-25k, depending on engine mods, rear end, etc.

I'm pretty confident in my numbers here, I've built >10 of these things.

Littleguy 03-13-13 04:14 PM

I agree, I spent over $20K for my LS1 FD w/almost perfect paint, perfect interior, all functions, etc.... But for that money you get a turn-key car that you never have to spend money modding or repairing unless you want to.

IAN 03-13-13 06:50 PM

I myself have not seen many V8 FDs for less then 26K or so. Post links of this completed builds for 20k. Thanks,

digitalsolo 03-13-13 08:50 PM

I found 3 on the other forum for under 20k in the past 4 months, without looking very hard.

ncaudio 03-14-13 12:28 PM


Originally Posted by IAN (Post 11405373)
I myself have not seen many V8 FDs for less then 26K or so. Post links of this completed builds for 20k. Thanks,

There was a runs drives FD LS with an automatic that sold for $8000 on norotors.com about 4 months ago (cheapest one I've ever seen, but it had the auto trans and needed the interior put back in), but decent cars are usually 12-18 and really nice cars that are done are usually more than that. I drove a LS3 FD with 18 miles on the motor, a 4K mile T56, chassis upgrades, CF front fenders, (nice) rear flares, fresh paint on a down to metal media blast, nice wheels and new tires for $18K, lots of high end parts, ($6500 motor with $1500 in accessories etc) but it needed some work.

It depends how complete of swap you want and what you can and can't live with.

Pez on norotors has a story about a swapped car he bought that caught on fire because the builder/PO used a hose clamp on a fuel line and wired the fuel pump direct, not a great combo.

automationLED 03-14-13 05:44 PM

my FD with complete color change paint job, volk ce28's, suspension work, slightly built LS1/T56 with samberg kit and properly done by a shop that's done 15+ swaps will probably be priced at $20-22k once i'm ready to sell

IAN 03-14-13 06:51 PM


Originally Posted by automationLED (Post 11406471)
my FD with complete color change paint job, volk ce28's, suspension work, slightly built LS1/T56 with samberg kit and properly done by a shop that's done 15+ swaps will probably be priced at $20-22k once i'm ready to sell

Pics location?

spooled704 03-14-13 08:44 PM

thanks everyone! And im not worried about it having a perfect paint job bc its going to be a straight drift car and everyone knows drift cars dont usually stay perfect. as long as it has a good motor and the swap is done correct and with good parts no wiring or other issues.

-BEASTMW- 03-15-13 11:41 AM


Originally Posted by automationLED (Post 11406471)
my FD with complete color change paint job, volk ce28's, suspension work, slightly built LS1/T56 with samberg kit and properly done by a shop that's done 15+ swaps will probably be priced at $20-22k once i'm ready to sell

Which shop was this?

jamesmadden3 04-23-13 12:12 PM

HSC LS1 V8 FD RX7

JUST DO THE BUILD YOURSELF FIND A DEECENT ROLLER!

jamesmadden3 04-23-13 01:06 PM

Anyone looking to trade??


Built SRT-4 04

AlexMartinez 04-30-13 11:47 AM

http://www.norotors.com/index.php?board=11.0

Ulburner 05-31-13 05:25 AM

Heck I am having a tough time finding the motor I want for less than 10,000. If you go with a 5.3 or some other truck motor and really scrounge i guess you could do one on the budget side but most of the nice ones i have seen are bumping 30k.

automationLED 06-03-13 06:42 PM


Originally Posted by -BEASTMW- (Post 11407171)
Which shop was this?

"the shop san Bruno" find them on face book

the owner a has a mild built LS7 FD which is his daily that makes 500whp, pretty bad ass

they completed my entire swap in about 3 weeks, included waiting for parts from Samberg and hinson, I was surprised at how on schedule they are, most shops say 3 weeks but take 3 months to show real progress

and for the time my car was in the shop, 3 other FD's with LSx swaps come through and had to get mickey mouse labor from other shops fixed, in the bay area, they're one of the most trusted shops when it comes to LSx swaps, the only thing is they don't tune, but newtech can take care of that

xxtremes33 08-25-13 04:03 PM

theres a lsx 3rd gen in austin/cedar park for 15k

JNProject 08-26-13 03:48 PM


Originally Posted by automationLED (Post 11485497)
"the shop san Bruno" find them on face book

the owner a has a mild built LS7 FD which is his daily that makes 500whp, pretty bad ass

they completed my entire swap in about 3 weeks, included waiting for parts from Samberg and hinson, I was surprised at how on schedule they are, most shops say 3 weeks but take 3 months to show real progress

and for the time my car was in the shop, 3 other FD's with LSx swaps come through and had to get mickey mouse labor from other shops fixed, in the bay area, they're one of the most trusted shops when it comes to LSx swaps, the only thing is they don't tune, but newtech can take care of that

Sweet! maybe they can help me with a wiring issue i'm having for my swap.


All times are GMT -5. The time now is 10:46 PM.


© 2024 MH Sub I, LLC dba Internet Brands