14.2 @ 101
 

I ran my best time of 14.2 @101 this year at the local street legal drags. I am running Kumho street tires and cannot get a very good 60ft time or I would be in the 13's. I got 7 runs today all in the 14's, but my last against a Mustang was my best. Hopefully next year I will have some drag radials or slicks and maybe a new turbo setup. It's still a blast to drive.

60': 2.279
660': 9.348
MPH1: 79.83
1320: 14.270
MPH2: 101.29

Good job. Any Vids? Pics of your setup? How much boost are you running?

thats not bad.
When I had my stock turbo I ran a 14.3 @98mph
my 60 ft time was a 2.239 LOL
did you get any wheel hop?
Did you dump the clutch or slipped it?

I will have some vids up on YouTube pretty soon. No pics. It creeps a little, but I was running 9-12 with it diving to like 7-9 by the end.


I have been battling wheel hop all year. I had been dumping the clutch, but recently have been trying slipping it. Slipping seemed to give better results. I really just need to get some drag radials or slicks.

Here are the videos. I got really bad wheel hop and had to let off on the second run. The last run against the Mustang was the 14.2 run and I beat her by about 2 cars, but it's hard to tell. http://www.youtube.com/watch?v=MWxoGSt5NJ4

Slipping the clutch will handle the wheel hop better. Just dont slip it too much or you will burn the clutch.
Last year in December, because of the wicked wheel hop I had, my axels snapped inside my diff LOL had to tow the car 30 miles home from the dragstrip. Ran a 14.5, then 3 4 months later with a TII rear end instead of a 4.3 N/a diff, I ran a 14.3 with a still shitty 60ft time lol

I ran a 14.2 with only exhaust, intake, and bov on stock s4 turbo. You should be able to get better. Launching these damn fc's is not fun.

You need ET Streets! I cut a 1.50 60 foot with those things. You would be staring a 12 sec pass in the face with that kind of launch..

Yes I do!

that looks like the loneliest little track

sad :(

I wished we had tracks like that in the east coast : /

It's not sad, it's GREAT! I got 7 passes in just over 1 hour. There were a lot of people there earlier in the day for Diesel Days. It's usually pretty packed too. If you can believe it there is a guy that ran 4 consecutive 6 second passes last year.

Thats a real respectable time. Any ecu up grades? FCD? Stock 5.5psi?
14.2 at 101 = mid 13's at that speed, with a great launch.
I ran 13.4@101 with my wrx 1.9 60ft. Its in the cards, just need stickies.
I just need to FCD my FC and I hope I'll be on par with your time.
Keep up the good work.

Very nice run, 7 runs in one hour- even better.
Have fun and keep us posted on your run times.

Thanks. Launching definitely owns me right now. I have an Rtek 2.1 ECU, but haven't tuned it. I was running a bit more than stock boost, average about 9-10.

Nice to see your 7 runnin consistent. I had decent launches on those raptors but could def tell mt launch could be improved. Track closed?

Yeah the track is closed until next April.

14.101 @ 98
 

So I ran a 14.101 @ 98 today for the first drag races of the year. Beat my best of last year, but it still feels like it has so much to go. If I could just get a great launch 13's would be easy all day. 60ft. time was 2.2xx :( All in good time though.

pedal to metal and powershift that bitch

That's basically stock FD times you have been running.

Those are really good times. Extremely close to what I was running with similiar mods. Get that 2.2xx down to just a 2.1xx and and you see a 13.9xx.

I concur that with those mods, slipping is the way to go. I would slip the clutch from 6500 rpms, let it fall to about 5k, and hit it.

:) I just need to end my wheel hop. I don't want to break. I saw a nice S2K lose his rear end at the line.

When I first ran my car, I had some crap Fusion zri tires. It didnt get good traction, its also why I probably got such a bad 60' time, that and the wheel hop.
This year, the wheel hop is basically eliminated, and I have some better rubber to get some traction. I am hoping for my 60' time to drop below 2 secs!!!
Since last year, I got another engine, rebuilt and streetported, with everything else same as last years setup with stock turbo and 4x720 injectors and rtek 2.1.
I am hoping to atleast get to the low 13s.

I just hope my driveline doesnt snap again from wheel hop lol
Hope the solid mounts do well.