stock twins running 11.70 at 5280ft!
I heard the fastest 3rd Gen with stock twins (without noz) runs 10.98 at sea level. The car was featured in one of the first RXtuner magazines. I am guessing that at sea level I would run a low 11 sec 1/4 mile. Just wondering how many guys outthere have 11 sec passes with stock twins? I dynoed at 406 horsepower with sight street ported motor, Power FC, Unorthodox racing pullys, Greddy 2 row FMIC, non-seq twins (boost all the way up), Kaaz rear end (430 gears), and BF Goodrich tires. 60 ft was 1.70 and ran at 117mph.
|
I ran 11.70 on stock twins and stock ports...
|
what are you guys launching at?
|
5500 RPMS...
|
Last I heard 5280 feet was a MILE. Thats one Fast 7 LOL
|
maybe he means 5280 above sea level since he referenced it in his post?
|
Yep, I'm up here in Colorado....but no more motor. I blew it. Now I am ordering a bad ass one from Akins or A-spec today. It will cost about 3500 to get the best of everything
|
Click Click Boom :hf:
|
Originally Posted by MichaelB145
I heard the fastest 3rd Gen with stock twins (without noz) runs 10.98 at sea level. The car was featured in one of the first RXtuner magazines. I am guessing that at sea level I would run a low 11 sec 1/4 mile. Just wondering how many guys outthere have 11 sec passes with stock twins? I dynoed at 406 horsepower with sight street ported motor, Power FC, Unorthodox racing pullys, Greddy 2 row FMIC, non-seq twins (boost all the way up), Kaaz rear end (430 gears), and BF Goodrich tires. 60 ft was 1.70 and ran at 117mph.
how much boost did you run to put down 406 |
he didn't have 4.30 gears did he?
|
When I put down 406rwhp it was at 15.93 lbs of boost. I ran 11.7 on stock gears. I now have 4.33 gears.
|
Originally Posted by MichaelB145
Yep, I'm up here in Colorado....but no more motor. I blew it. Now I am ordering a bad ass one from Akins or A-spec today. It will cost about 3500 to get the best of everything
|
11.69 on stock twins & cat.
|
<he didn't have 4.30 gears did he?> --> Nope stock gears (4.10:1) on MT ET Streets.
11.56 @ 122mph on stock ports/ non-seq twins/ stock gears and Nittos. tcb100:( 11.69 on stock twins & cat.) <<<<< NICE !!!! |
Running 14psi Stock turbos Stock motor and getting 345.7rwhp
|
I was boosting at 15.1 lbs on the stock turbos. The wastegate was wide open. I got my new motor fully built by Atkins rotary and I put in a GT35/40 from A-spec tuning. I should be running in less than a week once I put in the new clutch that can hold this power. After dumping so much money into this car, I think I will take a easy on it until I can get it professionally tuned by Matt (hitman). If anyone else would call them selfs a "rotary tuning master" and would like to take a trip to Denver Colorado in the next two weeks let me know. Matt probably wouldnt be able to make it that quickly. There is a big import show at Bandimere speedway in two weeks I would like to make.
|
I forgot to tell you guys that my car made it into the newest issue of RXtuner. I am in the section about NHRA at Bandimere. My car is the Red one that looks like its going to pull the front tires off the ground (not really) with the carbon fiber hood. It's a start!
|
I just made my first pass with the new motor and turbo. I was being very safe with it so I only ran a 13.3. So far so good. I think we are going to dyno it this weekend and turn up the boost. Hopefully 600 horse power!
|
From last night:
11.83 @ 115
5500 RPM launch on ET streets 1.03 bar peak boost (from PFC) Mods in sig: |
Originally Posted by MichaelB145
... I dynoed at 406 horsepower with sight street ported motor......
|
Hey fastrx7man what is your setup if you dont mind me askin?
|
All times are GMT -5. The time now is 10:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands