My FD Dyno update from HKS Thailand
 

643.8 PS. @ Clutch lost more than 100hp @ wheel... :(

T88H 34D 22Cm Boost @ 1.6 Bar
Custom Made Street Port & 2mm. 2Pcs Apex Seal & Custom Made Corner Seal
HKS F-Con V Pro 850cc. x 4 Injector
HKS Twinpower ,NGK Spark Plug 11.5
NISMO 280L/H Fuel Pump
TOYO Radial Tyres / W-WORK S1 18"x10" Offset +8 Rims
STD. Transmission / OS 2 Plate Clutch / 4.1+KAZZ 1.5 Ways LSD.
HKS Type-R Intercooler / RE 3 Layer Radiator

Damn!

$$$$$$$

hey i remember that car, speed-d, is this the same car at the megamall autoshow last summer in KL?? , also do u get your work down at speed-d subang jaya?

Great results, but this must be wrong (unless you've also got some massive additional injectors):
850cc. x 4 Injector

I see max power 483 PS on the sheets, which is pretty nice itself. What is "Clutch PS" and why does it just jump up at the end there?

-Max

Yes Mr.noman17 i'm owner of Speed-D Thailand...u remember my car :)
And on this 21st maybe i'll bring my car to Sepang. Mr Tony (Speed-D Malaysia owner) told me that will have a race day @ Sepang maybe see u there. :bigthumb:

awesome, race day the whole track of sepang?? love to see the car in action, unfortunately i probably wont be going back to KL till end of year, as right now i am stuck in the states working and building my fc, well make some videos and send it here man =) i'll make the effort to catch the car next time i am back there =)

im guessing clutch ps is flywheel, and i checked and theyre accounting for 25% drivetrain loss!!!!!
thats crazy
its more like 15% +/-

15% would be 568 flywheel


or i could just be misinterpretting that altogether

mr. burr , ( is that the correct spelling )

good result , is that tune by Dee .

the best looking FD i have ever seen ,
widebody

remember two weeks ago you took photo on my white FC ( 13b RE ) while i'm in speed D ,

WOW!!!!

Thats one hell of a FD!!!!!!!

Max, Clutch = at the flywheel, and PS = very close to HP, what they use in J-land and other countries. IIRC, 1.0 Japanese PS = 0.98632 BHP.

xblex, great numbers, and very nice looking FD! :bigthumb:

Help me out here. Im trying to understand. Im very interested as I have the same turbo. How much boost and what is max clutch and PS?? And what would those numbers equate to in final rwhp figure? Thanks.

hello friend :rlaugh: how're u?
this week i'll change turbine to custommade one bigger than T51R SPL...but not sure can run or not and maybe change the rim again u think this one look better than W-WORK :confused:

Ahhh...forgot one thing...
here ur car pics.. :)
maybe see u next month

Sooo, what does this power equate to in rwhp???

Ernie, I'm sure you can calculate/guesstimate the approximate drivetrain loss, and come out w/ the rwhp (ballpark figure). What is it...approx. 18% drivetrain loss for manuals (IIRC)?

In his original post, he said he lost more than 100hp @ the wheel. 18% of 643.8 PS is 115.884 loss, which sounds just about right. So he made about 530 PS @ the wheel. Again, w/ the conversion factor, that's about 520 rwhp (635 hp @ the crank)

What kind of IC setup are you running?

it says hks type r...looks like an apexi though

Yes.. HKS Type-R The old model..it's a kit for FD but i rotate top side to under and made all new pipe cause for the short & fast way to fill the air in IC.

sawatdee krub. thats one crazy FD man, damnn. love those rims also.

Today repaint all small scratch :D

:d

from what i know, PS stands for the german "PferdStaerke", which translates into "horsepower". They use this measurement typically outside of the united states.

i'm loving the engine xblex ;)

already fixed!!! :bigthumb:

Look like new car? :bigthumb: