Originally posted by 1FAST7 I want the Volk Racing LE37T i think they are. They are the ones that are 6 spoke in gunmetal with a polished lip. Are these the LE37T or LE37A? wrapped in bridgestone potenza S-03 285/30-18 and 255/35-18. 1FAST7 |
1FAST7 Redux II
Originally posted by 1FAST7 Well if the wheel is gonna stick out then i might have to go back to the other size ( 285/30-18 and 245/35-18)... I dunno, im kind of confused. Maybe i should just get the Pirelli PZero System Asimmetrico in the 285/30-18 and 245/35-18. Many of you say this sizing is very good and you cant beat it. any help welcomed. 1FAST7 According the Rack's spec link for the S-03 the 255/35-18 has the following measurements: Overall Section Width 10.3 inches and Overall Diameter of 25 inches. We're not worried about the OD because that's stock. We are worried about clearance up front. In general 3.5 inches frontspace and 7 inches of backspace are maximum dimensions for front wheel well clearance for FDs using stock sized springs. If we go by the overall width of the 255/35-18 tire, 10.3 inches in our calculation we'll be assured of proper fitment: Actually we know the answer to this question, as I've already posted the info on page 1 of this topic. With a little manipulation--backspace should be 7 inches, frontspace in this example will be 3.3 inches (well within 3.5 inches maximum) and offset will be 1.85 (47 mm). If you want to be safely away from the left-front fenderlip bolt, I'd go with a 51-52 mm offset up front for the 9 x 18. Clearly the tire size you choose will be "driven" by the available wheel offsets in the 18-inch wheel sizes you're looking for. PM Rishie for your needs,as he'll be able to help you weed through the seeimingly endless wheel choices. If you were poor like me, choosing would be MUCH easier :p Best of luck :wave: |
Do you know the right off-set i need? Then i can see the available rims at that offset. I hope they have the volk racing LE37's in that offset..
btw, are these the LE37A or LE37T rims im talking about? the ones that are 6spoke in gunmetal with a polished lip. 1FAST7 |
What is Rishie's name on this forum?
1FAST7 |
1FAST7 Redux III
Originally posted by 1FAST7 Do you know the right off-set i need? Then i can see the available rims at that offset. I hope they have the volk racing LE37's in that offset.. btw, are these the LE37A or LE37T rims im talking about? the ones that are 6spoke in gunmetal with a polished lip. 1FAST7 Best of luck! :wave: |
Originally posted by 1FAST7 What is Rishie's name on this forum? 1FAST7 |
Originally posted by 1FAST7 Well if the wheel is gonna stick out then i might have to go back to the other size ( 285/30-18 and 245/35-18)... I dunno, im kind of confused. Maybe i should just get the Pirelli PZero System Asimmetrico in the 285/30-18 and 245/35-18. Many of you say this sizing is very good and you cant beat it. any help welcomed. 1FAST7 |
Ok, Ive found my tire and now i need a rim. If the Volk Racing LE37 wont have the right offset then i have to go rim hunting. Any suggestions are welcome. What rims do you guys think i should get. and would meet the offset range?
1FAST7 |
1FAST7IV
Originally posted by 1FAST7 Ok, Ive found my tire and now i need a rim. If the Volk Racing LE37 wont have the right offset then i have to go rim hunting. Any suggestions are welcome. What rims do you guys think i should get. and would meet the offset range? 1FAST7 I think you'd better take this question to the Suspension/Wheel/Tires/Brakes Forum :p Happy New Year :wave: |
1fast7,
What is your budget for rims...$2k- $3k and up... style you like...we know volk 6 spoke...but I seriously doubt volk makes a 18x9 in the correct offset needed to run 255's up front..you may need to consider 18x8.5...any particular reason you want 18x9's ?...it's very tuff decision about wheels..because you will spending big bucks on 18's and you wanna be happy for the long haul..unless you got endless dough |
I will move this to the suspension/wheels forum...I've been thinking about doing this for a few hours already...why..
well JoeD, SleepR1 and myself are always in there....and it will get exposure to Rishie (ARDT2) who might not otherwise see this since he has a t2... |
Well, where'd 1FAST7 Go?
Originally posted by Johnny I will move this to the suspension/wheels forum...I've been thinking about doing this for a few hours already...why.. well JoeD, SleepR1 and myself are always in there....and it will get exposure to Rishie (ARDT2) who might not otherwise see this since he has a t2... |
youll be surprized if you see mow many sizes and models of tires are NOT listed in tireracks site. if you go to the actual manufacturers website, and look at the sizes they make for certain models of tires, you can find many that are not listed in tirerack.com.
|
Yup... I agree custom is the way to go and that's what I did too...so if I want to run 255's in front I dont have any issues...
But likey the wheel cost may go up $1k... |
Originally posted by JoeD youll be surprized if you see mow many sizes and models of tires are NOT listed in tireracks site. if you go to the actual manufacturers website, and look at the sizes they make for certain models of tires, you can find many that are not listed in tirerack.com. |
Sorry guys i had to go somewhere. My budget is about $2000-$2500 for rims. Does someone know for sure that volk racing doesnt make the LE37 in the size (offset) i need?
1FAST7 |
Volk Racing LE37T has 50 offset but it is 18x8.5... Would it work if i did 8.5 all around?
1FAST7 |
anyone have opinions on what i should i do?
1FAST7 |
what would be the offset for the rim if im getting 285/30-18 and 245/35-18? need help
1FAST7 |
Rishie (ARDT2), Please post on this topic. I need some help on which route i should go. 285/30-18 and 245/35-18 combo or 285/30-18 and 255/35-18. I want the Volk Racing LE37T to work. Unless there is a better looking rim for about the same price that will work. what should i do?:confused:
1FAST7 |
50 offset would be great with a 18x8.5....but 285's on a 8.5 I dont recommend...might be to much side wall flex.....
lets say you stay with S03's...with 18x8.5 all the way around you could run.. 255x35 all around... or 235x40 (front) and 255x35 (rear) you really should have a 9 inch rim to run 265's..that's why I kinda recommend 255's... I think that will look pretty cool. Rishie is trying to have a vacation.... :) |
Originally posted by 1FAST7 Sorry guys i had to go somewhere. My budget is about $2000-$2500 for rims. Does someone know for sure that volk racing doesnt make the LE37 in the size (offset) i need? 1FAST7 CCW's might be an option of you like mesh style...becuase that's all they have. |
Well, if i run 255/35-18 all around what would be the offset i need for the rim?
I think i still want the Volk Racing LE37T. If i get the 255/35-18, would the 18x8.5 be good or could i get a wider rim? 1FAST7 |
Originally posted by 1FAST7 Well, if i run 255/35-18 all around what would be the offset i need for the rim? I think i still want the Volk Racing LE37T. If i get the 255/35-18, would the 18x8.5 be good or could i get a wider rim? 1FAST7 255's on a 8.5 would be fine(8.5 is the min rim width recommended for 255's)...the lips wont stick out for sure...if they make a 9 inch rim or a 9.5..then you could move back to 265's...again keeping the offset in the high 40's-50 |
they make that rim in 8.5, 9, 9.5, and 10.5... They arent exactly high 40-50 range. The only one that is close in the 18x10.5 which in 45 offset.
1FAST7 |
All times are GMT -5. The time now is 09:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands