wheel fitment question on FD's front
stock shocks with H&R springs.
im lookin to buy some 17x9 +35 rims, but the fd wheel fitment chart says i'll have -0.13 clearance on the front. if i roll my fenders, would it fit without rubbing? 235/40 sized tires would give more clearance then 255/40 sizes right? because when i change the tire size on the fitment chart, it doesn't change the clearance at all :scratch: |
those offsets should be fine from what I know, if you are worried rolling the fenders slightly should do the trick.
|
thats good to hear, i really rather not have to roll the fenders
|
Well, I used to run H&R springs on Koni shocks with 17" x 9" +45 wheels and 255/40/17. I would occasionally catch the passenger side fender lip when turning into steep driveways at gas stations and shopping centers. I think my fenders are slightly rolled.
|
Originally Posted by gracer7-rx7
(Post 10218393)
Well, I used to run H&R springs on Koni shocks with 17" x 9" +45 wheels and 255/40/17. I would occasionally catch the passenger side fender lip when turning into steep driveways at gas stations and shopping centers. I think my fenders are slightly rolled.
the rub is minimal though right? guess i have no choice but to roll the fenders :( |
All times are GMT -5. The time now is 01:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands